Search results

wheel off set Thanks John, Now i was having a senior moment so i drew it out and arrived at 230/2 =115= Centre line of rim -65 from the outside= the 50 offset on the rim, strange but all 4 wheels are the same width 16 x 8jj.Do you happen to know what the offset is supposed to be, have searched...

I have this set of wheels that came on my donor uuz31 they are 16 x 8 /50 i'm trying to work out the offset of them and thought the 50 was it, when i measure from outside to flange i get 65mm and from inside i get 165mm so i'm confused, i have attached a picture as i suspect the wheels i have...

Thanks for doing that for me Rod, it will help heaps, do you have a thought on the 1.28 v 1.6 id tube i was working on the theory that 1.28 if i go N/A or 1.6 if i go twin turbos, from other articles I have read equal tuned length on the NA can make a big difference, but if it was turboed the...

I have been playing around with the Headerdesign.com calculator, the headers i bought from a local guy were home made 4 to 1 with 1.6 ID and are about 36" to the front of the collector cone. Does anyone have a head off that could be measured i need the exhaust port length from the valve seat...

Yes Rod good idea if its under the Tech section we will all know where to find it, and a Moderator can control what is entered.As you say we don,t really want any screwups. Regards Lambo

Skicky That would be a good idea David then we can post a link to those sites or howtos that we all find in surfing or tech items like above.the information is out there finding it when you want it is another matter. Regards Lambo