Search results

I have been using VQ30 Nissan coils for 2 years now. They have worked out well and they are very plentiful in the local junk yards near me for less than $5 each. They to have built in ignighters so the ms2 only needs to trigger them. I have spent lots of time fighting with the stock crank...

The 1GZ has 6 coils, part number 90919 02213. Two of these coils were also used on the 1995+ 5E-FE engine. I pulled a pair from a Paseo at the junk yard the other day and they are the same thing. The two plug wires are even the same as the 2 shorter V12 wires. At $5 a pair for used OEM I plan...

UPDATE Name: Brett Hendershot Car: 1986.5 Supra NON Turbo (MK3) Motor: 1992 SC400 matched set Transmission: R154 with 1jz bell housing and bebop adapter Date completed: completed October (14 ? ) 2007 Location: Rochester NY, USA Whipple 1600A supercharger and Mega Squirt 2.3 EMS added April 2010

Very nice, its cool to see some one else felt up to tackling the 1GZ. There are so few people playing with this engine and I feal that the 1GZ has huge potential. That looks like a vey cleen swap. What transmission did you use and what is your setup for the manual conversion? I am currently...

I have a big car show coming up in 5 weeks so I am crazy busy till then doing the spring upgrades on my supra but after that I could also probbly make you a manifold like the one I made for my supra. I have been useing mine for 2 years now with no problems. I still have the fixture that I made...

the 1gz and the b16a both have a 21mm wrist pin. I am not shure how close the 4age and 6a13t rods are. The b16a has such good aftermarket support that forged rods for it would be much cheaper and more common.

Some how this lost its pics when it posted so I had to post it again Weight of Long block: not sure yet Bore and Stroke:81.0 x 80.8 Bank degree: 60 Deg Dimensions (L,W,H) of motor: I plan on making a nicer version in Photoshop at some point but hear are 2 pics of the rough sketches I made up...

Untill I install the turbos I was planning on using the 440cc MK3 supra injectors. Once I start boosting I will need to look for a set of 650cc to 800cc injectors. I will be running mega squirt 3 so I can run sequential injection and have the option to run true COP if I find I need to replace...

If you still have the MLS gaskets and they will work on a 92 SC400 block I will take them.

Have you looked at the Precision Turbo billet series turbos? Something like the SC6262SP turbo may be able to do what you want. Precision also has some sweet ball bearing turbos and there prices seem to be a bit lower then Garrett. I forget where I saw this posted but the calculator has quite...

To V8Goodness, PM me with what you are looking to have done. I am in Rochester NY so not that far from you (I actually have relatives in Toronto). I don't have a "business" but I have been known to do swaps and builds for people. I will also hopefully be gaining access to my new garage shop...

Test fit the new 8MM HTD belt drive for the Whipple on my spare 1UZ V8 last week. I think it turned out nice, all that's left is to figure out where to mount some kind of tensioner pulley and fabricate the mount for it. One of the nice things about Curvilinear belts is I only need like 7 to...

I did some measuring on the injectors and all though they look different from the Denso style injectors found in the 7M-GTE and the 1UZ-FE the only actual differences are the spray pattern and the 7M/1UZ injectors are about .030" shorter. I think that the 7M-GTE would work just fine if the fuel...

I have started working on my 1GZ-FE engine and I will be makeing some custom parts for it. I figured since there is just about zero aftermarket for this engine I will post a list and pics of the parts I am makeing and the price in materials that each cost me to make. If any one else would like...

I got started on takeing the 1GZ appart this weekend. She's allmost just a long block now. I have been takeing lots of pictures of how it comes apart as well as part numbers. I will be trying to put togeather as complete a parts list as I can as well as any other helpfull info. I am looking...

Was looking at more cars today and added 3000GT and 80's 300ZX to the list. I have always liked the early 3000GT and the 300ZX came with a digi dash and T tops both of witch are a plus in my book. I would have to say that at this moment the Datsun Z and the MK3 supra are at the top of the list...

If you have the iacv that is held togeather with screws carefully take it apart and give it a good cleaning. I had to do that to mine a few years back. I had finished my swap and had been driveing the car for a year and then one day it just started idleing very high then low then would stall...

I looked at the altezza but they dident make a 2 door and they are to new. I wont buy a car made after 1995 for any reason. If a car is OBD1 or older (pre 1995) I can do basicly anything I want to it and it can be inspected and put on the road with no questions asked. OBD2 cars have to be...

I have been thinking about what I want to swap my 1GZ-FE into and due to not being able to see some of these cars in person I and unshure as to the size of the engine bay. For toyota I am. Thinking RA25 or RA28 celica, 1st or 2nd gen Soarer, MK3 supra. The celica's my first choise but the...

I don't know how much they cost to ship but i have a bunch of Toyota auto trannys kicking around. At least 2 were from SC400's, a 1992 and 1994 if i remember correctly. About 80,000 miles on the 92 and 60,000 on the 94, take your pick $100 plus what ever it costs to ship. I have Monday off...