Search results

What are you doing with your motor/car?

Stick a 76mm turbo on it and spike it to 25psi (like we did) and it won't last long!

Hey Mate yes we run 700cc denso/sard injectors on our 1uz single turbo.

are the inlet and exhaust ports any diff?

Yes very!, mainly the heads and inlet. thanks

I'm up for helping out pull the motor and anything else i can do.

Will be very interesting to see the before and after dyno results. i thinkyou should make good numbers up top. There is no runner now, you may loose a bit down low. Looks great when do you think you will have time to hit the dyno?

We ran a 4" pipe where the ac compressor use to be, beside the engine mount then split it into dual 3"

They will be cnc ported.

Thanks, for the interest guys. It will be driving the 1uz development further on. As for the flow i'll keep everyone updated once we get the head on the flow bench and we will be going back and forth untill there is no more left in it. We have the now cut up head to allow us to see inside and...

Hey guys, going to be getting cnc heads done for 1uz, need to know how many of you would want bigger valves in your head if you are doing all of that stuff. I'll start with cnc heands for stock valves then we'll go from there.let me know if any of you guys are interested. Cheers

So the car is going to be 1000 kgs and you only want 500hp? 2jz'z and 1uz'z are not the same. 1uz heads vs 2jz ported? If you want to have a low rev limiter at least at first. just try and run a garrett or tial GT35/40 with a 1.06 rear. if its not enough then get the to4z front wheel put in...

Hey Mate, I would just forget about the high comp root. Just get the motor in and running with whatever exhaust you can and the stock computer. If its not enough power then look at getting a good computer intalled that will allow the rev limiter to be raised and the air flow meter to be...

Hi guys still need one good head!

Where would i find this stuff?

Hey guys i only need one head now, as i won't be able to weld up the ports but i may be able to use a resine of some kind.

Hey guys, i need two unporteed heads, so i can cut up one and try welding up the side of the inlet ports so you can port the heads alot more. I will measure the wall thickness before grinding through to the water jackets. again these heads can be stuffed and un useable all pics of the work will...

Thats would be great mate. As for the intake I will be getting serious about in the next month or two.I'll lend you one to test if you want for free with a tb on it. Thanks heaps with the head

Hey Guys , I need a stuffed Head which i can cut up. Anyone in sydney have one or anywhere else in oz. Cheers Ben

Hey Rod, have you got a dyno sheet you could post up, would love to compare it against our turbo motor.