Recent content by V8Datto

  1. V

    Twin turbo UZ ST185

    Nothing worse, hope it's nothing serious. Looking forward to seeing how much you get from the new setup
  2. V

    having a nap

    Ok I've gotta ask.. With no visible track/road or damage to the cruiser in the pics how did you put it in such a large hole so slowly in the middle of nowhere?
  3. V

    Wanted 1UZ Heads

    ......PM sent
  4. V

    Wanted 1UZ Heads

    I have a set (early 1uz), but in Melb
  5. V

    Engine build up

    Google "a340e actuator shim" I found a full wright up with pic's Don't follow all pictures you see on the net, there are different version of the a340 box, The pic's in the wright up I found was slightly different than my auto but would be enough to get by. Also another thing, I have an early...
  6. V

    Engine build up

    Can't help with full specs, I also did the mods to mine off the info in this thread The oil pressure for the entire box also runs of an adjustable actuator which is all ready set to the highest setting but can be modded (very easy) to go up one more step. 1.5mm thick triangle of alloy made in...
  7. V

    Engine build up

    If you don't get on to elliotaw, I might have some pic's What are you chasing after?
  8. V

    DIY Smoke Machine for Leak Testing?

    cheap smoke machines on e-bay go for $50 surely you can't make one for that?
  9. V

    Lots of 1uz's

    Classic... It kinda like the time a mate's "petrol" Patrol broke it's gear box, so we towed it home with a Diesel Landcruizer only to have to stop and fill up the Patrol "being towed" so the brakes worked. Some nice conversions going on there, gotta love a van with a 1UZ
  10. V

    Turbo boat

    Yeah seen that a zillion times, Still good though.
  11. V

    twin throttle body

    You've seen the pictures on here, I have one of Justin GT8's old manifolds, proven to make more power when under boost When I re-dynoed my car it made power all the way up to 6100rpm but lost 25nm and about 5kw across the board. In a way you could say It spread the power out more across the rev...
  12. V

    twin throttle body

    Be careful though, I changed my intake (top and bottom manifold) and lost power through the entire rev range. I still have standard cams and ecu,
  13. V

    Wanted Plenum Chamber for 1UZFE

  14. V

    Wanted Plenum Chamber for 1UZFE

    If you don't get Justin's manifold, I have one. and I'm near Rowville.
  15. V

    Just installed 315cc injectors, stock ECU, now not running right

    I thought stock ecu and bigger injectors = more fuel No wonder it doesn't run right, unless you've changed/modified something else?
See more


Top