Recent content by tfb5701

Bump to the top

I am selling a Navigation update DVD for 4th Gen navigation systems. This is the North American maps version so it covers the USA and Canada. This is version 9.1 which was released in October 2009. It will work on may Toyota/Lexus factory systems . Below is a list of other systems this DVD will...

thanks for all of your help, i printed off the information and gave it to the installer today to have them rewire the imputs. i hope it works.

i found the diagrams in the tech articles section. however, i don't know what all of the abbreviations mean. here is the article- http://www.lextreme.com/Lexradio.pdf . What does WP+, +B, WP-, amp, and E mean? which one/ones is/are the imput(s)?

thanks for the help. does anyone have the wiring diagrams for the harness that connects the stock amp? i need to be able to figure out which wire(s) is/are the imputs.

i just had a JL audio 12 inch w6v2 installed in my 95 LS 400. When they wired in the amp, they disconnected the stock sub in the back and used that as the imput for the new amp. However, the new amps imput can barely handle that strong of an imput and when i turn it up loud, the distortion...

if it is under the glove box, how do you get the panel off so it can be accessed?

Does anyone know exactly where the stock ecu is located in a 1995 LS400 and how to get to it?

I have a 95 LS400 with 130,000 miles on it. i believe it still has the original shocks on it. I was wondering what are some good aftermarket shocks and if any company makes ajustable shocks that fit a LS400. the ajustable shocks i saw advertised has a dial on the shock that you could ajust.

thanks a bunch

i am trying to install an apexi s-afc 2. I was wondering if anyone had a wiring diagram for a 1995 LS400? I was also wondering if the 95 LS400's had a "hot wire" afm or karmann afm? thanks for any help

what i mean is what was the fuel correction that you used on the dyno test of the lexone fuel correction system that you sell on this site?

i have a 95 LS400 with BFI. i just installed an Apexi S-AFC II. this version has a 12 point fuel curve vs the original apexi's 8 point. i was wondering if anyone had a rough idea of the correction's that would help gain the most hp. i saw the dyno for the unit being sold on this site. i was...

how easy is it for someone to read the instructions for an apexi safc2 and the o2 meter and program the safc2 themself? by the way, i just ordered an Apexi S-AFC 2 a few days ago and will be getting it calibrated soon. ill get my baseline dyno before and after. if anyone wants a copy of the...

i came across this hyper ground system lately. i've seen dyno results so i know it works. however it doesn't have the LS 400 as a car that it works on. however it has the gs400 as a car that it works on. does anyone know if this wiring kit would fit on a 95 LS 400?