Recent content by tetnt07

whats the difference? I pulled the injectors from my 1uzfe (1992 ls400) and i want to install ones from my old engine, the thing is that the ones from my old engine(1992 sc400) are a little different. can i still use them?.

Bravo not Alpha Trust this if you run a 1uzfe with an alpha you'll kick your self later. the alpha is designed for low h.p. motors(4 cyl,6cyl). they have been mated to V8's but usually stock low output models, the impeller that draws water for cooling is too small to cool a 1uzfe, the merc...

all burned up the original "sc" harness and ecu were damaged in a fire.

I have a 1992 sc400, we installed a 1uzfe from a 1992 ls400, using the wiring harness and ecu from the ls400. after extensive rewiring of the harness and chasis, it runs and everything seems to function. the problem is that when i first start the car cold it run fine but as soon as the car warms...

I just installed a !uzfe from a 92 ls400 in my 92 sc400, in starts and runs fine except it seems to misfire under load, i dont know if its ign. problem or fuel injection problem. its got all new spark plugs and wires and new dist. caps. it will rev to any rpm without droping out or missing...

I have a 1992 sc400 with a 1uzfe and auto trans. the problem is that every morning i have to let the car warm-up for at least 10 mins. before it will go into any gear, then it will only go into drive (no reverse). after i drive about a block reverse will work, and for the rest of the day...

I have a 1992 sc400 with a 1uzfe and auto trans. the problem is that every morning i have to let the car warm-up for at least 10 mins. before it will go into any gear, then it will only go into drive (no reverse). after i drive about a block reverse will work, and for the rest of the day...

can i carburate a 1uzfe