Recent content by techo

Ignition for 1USZ I am the Australian agent for the Electromotive products. I still dont know why everyone that has never seen the product range has their head in the sand. Just in case you want proof it works look at the seven second lexus powered drag car in QLD Australia! It is the simpliest...

What Cyl to pair The cylinders to pair are easy to work out the firing order is 1-8-4-3-6-5-7-2 (same as a Chevy) so pair the following cyl together. 1-6, 8-5, 4-7, 3-2. If you have any problems ring me. If you also want an easyier system to install try looking at the Electromotive XDI...

Rethink your Numbers Nath I just read what you are looking for HP wise with your drag car Nath. Let me say that the GoMac Lexus i supplied the direct ignition for went 905HP on its first dyno pull on mild boost and a fat fuel setup with a basic safe timing setting. If you plan to run methanol...

Stand Alone EFI Systems Why are you running to get the latest systems that still doesnt have any of the built in features of the Electromotive TEC3R? If you want to see the best on the market hands down go to wwww.getfuelinjected.com invest some reading time and see what can really be done with...

1000 hp easy The 1000 HP mark was passed over 2 years ago with a blown Lexus by GoMac Engines, it then went on to run a 7.9@165mph approx at Willowbank. I know all this as i helped him finish the engine and I also supplied the Electromotive Direct Ignition system. On the dyno on the first day...

Alternative Ignition! Why dont you look outside the square and use a system that has been designed to be used in a custom application in the first place? Try looking at www.directignition.com there you will find the XDi which will work in ANY application

Ignition for LPG setup on 1 UZ I have a simple answer to all your ignition questions on how to run a stand alone ignition with the LPG. Look at www.directignition.com and then email or ring me on 0419702240 to get your XDI Direct Ignition within Australia. I have already had experience with...

Where is the best place to buy a 1UZ from in Sydney. I Would like the auto also, but dont need the ECU etc as its going into an HQ with an Electromotive TEC3 ECU etc?

New camshaft firinf order Well i am going to be talking to a few of the cam companies and see what is available in the way of the cam blanks and if it is possible. The new firing order is 1-8-7-2-6-5-4-3. It also evens out the firing pulses on the crank shaft and i believe is will smooth the...

Why leave it alone If we leave things alone then why are we all trying to build the better 6 Bolt engine? The fabelled Small Block Chev would have ended up being a generator motor if we did leave it alone!

Has anyone realised the firing order of the mighty engine we all worship is the same as the famed Chevrolet. With that in mind has anyone looked at the benefits of the cam change called a 4-7 swap. After looking at the firing order in relation to the crankshaft i believe that the firing order of...

I priced the given con rod bolt made by ARP and i can sell them here to the Lextremers for $150 Australian Dollars. I can be contacted on 0419702240 Nigel

Lexus Head Flow Rates I personally have seen the heads on that Blown Lexus Altered Darg car and know for a fact they have gone 200 PLUS CFM. Speend costs, how fast do you want to go! I am having my heads ported by Go Mac and they will be better again than the previous motor.

LPG and Lexus V8 I have a simple solution for anyone using LPG on a Lexus V8. I import a stand alone direct ignition system that is so easy to use. It can be tuned by anyone that knows what timing they want. I can also supply the LPG comonents. It cost more than the crap components out there...

How to fit a Lexus into an HK Does Rod make a sump and mounts, same as HQ i bet for an HK, as i just got given an HK wagon for free in good condition?