Recent content by knobhead

  1. K

    I require wiring diagrams of engine loom for Celsior model E-UCF21-AEPQK.

    I posted 10 good photos of project but they seem to have disappeared
  2. K

    I require wiring diagrams of engine loom for Celsior model E-UCF21-AEPQK.

  3. K

    I require wiring diagrams of engine loom for Celsior model E-UCF21-AEPQK.

    I tried real hard but gave up. Too many hurdles, steering was a big problem as well as exhausts ran straight into main chassis rails. Also had to chop firewall to suit heads. I made an alloy sump to suit 1UZ V8 to fit car frame crossmember and front end, also engine mounts to suit TR6. Each time...
  4. K

    I require wiring diagrams of engine loom for Celsior model E-UCF21-AEPQK.

    Hi guys, I am into my next transplant, 1UZ-FE 1996 front cut Celsior into a pommie classic Triumph 1970 TR6 with LT77 5 speed on rear end. I require wiring drawings as wiring is totally different than earlier model drawings when I did the Stag transplant in 2010. I am using a haltech...
  5. K

    lexus v8 into triumph stag

    1UZ-FE into Stag I'm about two thirds through the project, without re-inventing the wheel as some of the guys have done. There are several or more challenges, generally with a compromise solution. I dropped the front crossmember 20mm, added 15mm to the length of the Intermediate steering shaft...
See more


Back
Top