Recent content by hi98gs

Brand new, I ordered for 1uzfe, they sent for 1uz. I can't use em. So 160.00 shipped. obo. these have never been used. I don't have the nuts/washers you will need to get these.

Sold. moderators please close

Brand new Kenne Bell boost a spark (forced induction model) never installed, all wiring and instructions included. 200 shipped

I'm finding that out now! ugh!!:15:

Looking for 98 Lexus GS400 transmission valve body. Needed ASAP.

How can you tell if the VVTi is working properly or if the cam sensors are working? When I start up the car, there is a rattling sound for about 1 second then it goes away. It has always been doing this since I installed my Vipec v88 (linksys G4) It almost sounds like the valves are tapping...

I need to get the stock cam info for a 98 GS400 (1uz VVT-i) Lift Duration lobe center intake opens/closes (usually degree relative to TDC and BDC) Exhaust opens/closes (usually degree relative to BDC and TDC) Thanks

Sorry, my bad, I have a TT'd 1uzfe. Also have a bunch of other stuff on it. That is why the cold plugs.

After rechecking everything, I think I found the reason for the "stumble/shake" at cruising speeds. Looking at all the plugs, I did notice that one plug was extremely foul compared to the others. I decided to change plugs. I used NGK 4554 (v-power heat range 8) as the replacement for the...

the model # is SL4-550 High impedence I don't have pics of it now. I have a pic of it when it on the engine

Have 8 RC 550cc injectors for sale. 620.00 shipped

converted to MAP.

I am not too sure what keeps the engine rpm limited. My understanding is that is a fuel cut on the oem setup. Don't really know if it is reading cam or crank motion to trigger the cut. I currently running a full standalone setup. Initially was running the autronic SM4 but after the rebuild...

My car runs fine throughout. It's just that when I am cruising I start to feel the "stumble/shake" The car runs fine on part throttle and accelerates well. It only happens when the throttle is held in place. I checked my TPS and it is dead on. I used an OBD scan tool and it reads 15.7%...

I have also had the same problem since my rebuild. I still trying to find the cause. I have a "stumble/shake" when the car is cruising at 50 mph at 1500 rpm and on level surface. It will continue if I don't put more throttle and will go away if I tap on the throttle but will come back if I...