Recent content by g-machine

  1. G

    1uz starts but only has power to 2 injectors

    Fixed the pins and replaced drivers side coil and car runs now
  2. G

    1uz starts but only has power to 2 injectors

    Thanks for the help again, I contacted company told him what it was doing he rechecked the pinouts and those two trigger pinouts are on the wrong pins, he told me what to move it to and knew immediately it was wrong.. hope it works... Thanks again for help..
  3. G

    1uz starts but only has power to 2 injectors

    it's just so weird it worked great 12 months ago then i put it in sealed container for 12 months and now it's not.. the good thing is its never bad to have a backup ecu regardless so I'll probably just order one. Thanks for the guidance and help.
  4. G

    1uz starts but only has power to 2 injectors

    With ecu disconnected the ground fault went away... that make sense? With ecu
  5. G

    1uz starts but only has power to 2 injectors

    I will I was just fishing for opinions and I figured it out more... Now Change of symptom.. ok hooked the noid up and the rear two injectors light up solid with key on and don't pulse and the other six pulse when cranking which is a good thing...
  6. G

    1uz starts but only has power to 2 injectors

    Thanks in advance....1997 sc400 engine, I sent my harness to a company to make for me, I hooked up what they told me. Hot, starter,alt,engine ground.. my car fired up if I regulate fuel with a switch otherwise it filled rear 2 cylinders with fuel. I thought I had a stuck injector or 2 until I...
  7. G

    thermostat housing nipple?

    Thanks for fast reply
  8. G

    thermostat housing nipple?

    I'm putting 97 sc400 motor back together for my 77 celica swap and do I just plug off thermostat housing nipple since I will be running a normal radiatior and not a pressurized resivoir? Thanks in advance and this is my first post


Top