Recent content by CassMori

you're right, I took a look at the high-res pics I made when I got the manifold in, with close-ups of the numbers. It's the 23250-50010 (I don't see that small print to well, apparently :redface: ), these must just be faded badly, because they're definately gray, just a touch lighter shade than...

hey guys, I know this is kind of an old thread, but this is the closest I could find via search to what I was looking for. I've got a 1uz manifold I bought off eBay last year, for the TB for my Supra, and I've been trying to find out which injectors it has since then. They don't match any of...

That was perfect! I checked the TPS specs against the TSRM for the MK3 Supra, and they are identical! same pinout, same resistances, except for vc-e2, ours is 4.25-8.25 kOhms! Are all 1uz throttle bodies the same (other than the trac control, of course), ie, do they all use the same TPS? Much...

hmmm, that sounds almost identical to the 2j setup (it also has the trac control, and opens upward when viewed from the front). It is still under debate on how well the 2jz TPS will work with the MK3 Supra electronics, though; the ohms are different, but may work with the ecu. I kind of...

Does it open upward when looking from the front, or from the back? If it is from the front, it's the same as the 2jz rotation. But, if the TPS is compatible with my ecu & harness, that shouldn't be a problem. I'll check on the Camry, see how thier TPS interacts with the Supra electronics. What...

I posted this in the conversion swap forums as well, wasn't sure which would be the best! Hi guys, I'm kinda new to all of the Toyota v8 stuff, so please don't treat me too harshly. I'm looking for info on the uz throttle bodies, specifically bolt pattern, rotation of butterfly, and type of...

Hi guys, I'm kinda new to all of the Toyota v8 stuff, so please don't treat me too harshly :) I'm looking for info on the uz throttle bodies, specifically bolt pattern, rotation of butterfly, and type of TPS used. The reason is, I am working on a front facing intake for my 7M-GTE, using the...