Recent content by bram boekestein

You've got PM Bram

Do you got the AC compressor? How much do you want for it? Bram

I found this some time ago: Can you make a CAD file out if it yourself? Otherwise I can upload the .dxf Cheers, Bram

The only problem is that the Hayabusa have a 42mm bore, at least the early ones, newer ones can be bigger. If you want to use the flange in the picture your tube from the flange to tb will be interfering with the injector. 32 degrees angle is in Trond's design, and here 42mm interferes with the...

You mean the Hayabusa ones? If you want to keep cost down, you can weld round tubes(dia off the motorcycle tb) to an universal flange. A flange like in the picture would be much cheaper to machine(it's a quick edit of Trond's intake) the ports can be matched to the round tube, now it's just the...

Exactly Trond, that's the problem with Gcode/NC code. You need to know what mill and tools they have. Only possible for the company really. What manifold do you want machined Cribbj? I can make drawings from the manifolds for you so you can take those to them. Or save any format you want. My...

Why do you want Gcode? The advantage from SolidWorks is that it'll write a programm for you. But the machineshop needs to be on a Solid kernel, not Unix or so.From SW you can save to almost any format.There are a lot of program's that will make the Gcode for you. Even a lot of free ones.

I can ask my machine shop, wich is going to do the other intakes how much they want for it? But only serious enquieries. Email or pm me to discuss. Bram

I'm helping Trond to get these machined. Not the 4age ones though. I dropped the drawings off at the machine shop yesterday and they will call me when they have a quote. I dropped of the universal ones and the Jaguar Supercharger ones will be there as soon as they call me. $1200 was that from...

You can make one yourself.Here's a handy pic I found in my files:http://www.heerlijklimburg.nl/bram/thermostat%20housing%20neck.jpg

You got PM regarding machining. Bram

Hi, Your camry cops are with internal ignitors, but all ebay ones need external ignitors (different P/N's). I can't find the ones you have. Google only shows your build topic with your part number, not a single other site, so they must be pretty rare. I was thinking of using the tundra/land...

Found out myself, they defeneditly need external ignitors. Omex offer DIS coil packs for 4 and 6 cyl. engines. Can such coil packs be used with CBR600 COP's or other COP without internal ignitors, or are such coil pack's to be used with a plug and pluglead form the coil pack?

Landcruiser or Camry(1MZ)? The Camry/ES300 look like external ignitors on pictures on ebay, they are 2 wire but he didn't know if they needed external ignitors. The ones on ebay are P/N: 90919-02211 unlike hypronet P/N: 90915-02244. There is one offer on ebay ending in 5 hours, but I want to...

Thanks Kevin, Aren't they the same as the 2UZ ones? They don't have internal igniters do they? I want internal. Ebay is full of these COP's, allthough different part numbers as in your topic, but still from a 1MV-FE, cars like Lexus ES300 and Toyota Camry, but at least 5 different part numbers...