Recent content by BARRY

bump before i sell the car.

does that adapter provide enough room for the input shaft to seat correctly? what are the thicknesses of your adapters if you don't mind me asking.

the plate i'm using is about 1inch thick or so. i read the transmission bracket maybe we could reuse the automatic one but flip it backwards? or was that only for v160's?

do you have the same hardware items as i do for your swap?

I have a few items, and was hoping some of you could guide me These are what I currently have: 1992 SC400 7M R154 transmission 1J R154 bellhousing TTE Adapter plate SupraRunner Flywheel for R154 my question is could i piece together a driveshaft or do i have to go full custom? Also i believe...

use vimeo. they support HD video's.

when the better companies sleeve a block, they bore out almost EVERYTHING. they use a few MM of the old bore and drop in a brand new sleeve. i would not worry about sleeving this motor. it should be fairly easy. the cyl bore spacing looks more like a real engine now.

so where did you get the flywheel from? RPS?

factory integra type-r pistons come with a skirt coating from the factory.

soarer/sc400's can be sourced from either the sc300 or supra. someone in hawaii who did a 2jzgte swap into a toyota gs300/aristo used a custom downward pedal used a wilwood spare, and chopped his brake pedal. he said it was a pain in the butt, but he got it to work flawlessly. he actually had...

cribbj, thanks for the info. i'll dl the manual right now.

well... Phill Bradshaws flywheels sounds exactly like SuperRunner's flywheel. I have read that the v160 spline is one in its own. I would not have any idea how to look up what friction disk would have the same spline as a v160's.

David, Sounds great. I will be in contact with you. I definately am planning to build a ultimate stroker race engine for my competition drift car as soon as I have enough saved. We'll talk more about it.

ok through a lot of searching i've learned. 1jz and 2jzgte clutches are totally different. the friction disk is smalller on the 1jzgte. also the spline is different between the R154 and V160/V161. you can swap complete flywheel/clutch assemblies on the 1jzgte and 2jzgte if you are using the...

i bought a flywheel from him, but it does not work with the V160 transmission from what he told me. i was wondering if i could use his flywheel, with a 1jz/7mgte clutch and it be compatible with the transmission. the flywheel i bought from him is for 1uz engine / 7m+1jz clutch / r154 tranny