.002" is a massive press fit, you'll most likely damage the flywheel if that's the case. it should be .0002" to .0004" clearance.
also the 3sgte flywheel is a complete pile for use with the uz engine. 3VZ is the correct flywheel to use. it has the right ring gear, facing the right direction...
o Pin 7 – Green-White in color
§ From “Stop Light S/W” to “ECU” and "TRAC ECU"
o Pin 8 – Empty
§ No Pin? Confirm?
o Pin 9 – Brown-Yellow in color
§ From Cruise “CTRL ECU” to “ECU”
o Pin 10 – Empty
§ No Pin? Confirm?
o Pin 11 – Black-Orange in color
§ From “7.5A IGN Fuse” to...
o Pin 17 – White in color
§ From “1 S/W” to “Comb. Meter”
o Pin 18 – Empty
§ No Pin? Confirm?
o Pin 19 – Empty
§ No Pin? Confirm?
o Pin 20 – Yellow-Black in color
§ “Oil Pressure Sensor” to “Comb. Meter”
o Pin 21 – Green-Orange in color
§ From “ECU” to “Comb. Meter”
o Pin...
This should help
Hi all, I thought I would put together a complete “guide” if you will for a Pre-89 1UZ-FE swapped Supra. This swap is gaining in popularity so I figured if we have a good platform to get wiring information it would help ease the process. First I will list the Supra...