W Warren cronje New Member Messages 1 Oct 30, 2019 #1 Hi guys I just cannot for the life of me install the serpentine /drive belt on my 1uz.. Any assistance would be greatly appreciate
Hi guys I just cannot for the life of me install the serpentine /drive belt on my 1uz.. Any assistance would be greatly appreciate
Zuffen Super Moderator Staff member Messages 5,631 Location Sydney, Australia Nov 24, 2019 #2 I find if you wrap it around all the pulleys (other than the tensioner) then use a 14mm socket and drive and flex the tensioner the belt slips on. Ease off the tensioner and all should be good. If it wouldn't go on it may be too short. Check you have the correct length belt.
I find if you wrap it around all the pulleys (other than the tensioner) then use a 14mm socket and drive and flex the tensioner the belt slips on. Ease off the tensioner and all should be good. If it wouldn't go on it may be too short. Check you have the correct length belt.