Cheers Warren, looks like you, Zuffen & myself are all using this charger (is yours the 422 model, or the 420?), but none of us have it running just yet. Are you aware of anyone else using it? It would be interesting to compare installation ideas with others.
Mine will be on the motor, hopefully yet this month or next, and we'll be dynoing again soon. I've had the charger and pulleys sitting here for quite awhile, but only started checking them the other day, and realised I didn't have the right pulley for the charger, so I've ordered up a couple of new ones from Andrew.
I have an 8 rib, stock size drive pulley, and will probably start off with a 91mm SC pulley. I'd like to start with a larger SC pulley initially, but apparently can't due to hood clearance issues.
I'll start with a set of
Mazda RX-7 460cc injectors, but may have to bump up to the 550's, which I understand, Rod is planning to use.
No intercooler on mine, but will do M/W injection, pre supercharger.
My engine is 10:1 compression, so I may have to look into a small wastegate setup, or another means of bleeding excess boost from the manifold.