Isuzu Mu wiring to 1uzfe

[Roga]

Hi can anyone help with some advice please
I am fitting a 1uz to a 1990 UCS55 Isuzu Mu
This vehicle was Diesel Manual
I am fitting the 1UZ complete with auto
The auto is converted to 4wd using a transfer box from a Mu
This has the advantage that the Mu transfer is completely manual and with changing the autos output shaft it bolts straight on, it also has the same type of speed sensor style as the 1uz auto had so the sensors fit with no mods at all.
The engine loom is complete and will be installed this way so hopefully I only need to find out the pin out for the plug shown with the plug installed.
This is the original wiring between the car and the computer.
am I on the right track ??

 

[sideshow]

that plug does stuff for the ecu mainly for the auto

there are 3 other plugs which u need to get yr multimeter out and diagrams and power the engine and the ecu up

ask around somneone on here recons theere only 7 wires to connect and yr done

 

[Cobber]

Your on the right track, if the other plugs are un cut your almost there. The information is on the forum just look for celsior wiring. Alittle more than 7 wires but if you are capable of the mechanical side the wiring shouldn't be too hard for you to do. Have fun.