Latest activity

  • G
    gnc replied to the thread Wanted Lexus powered Cobra replica.
    hello, ive got a lexus powered AK, with manual gearbox, i might be interested in selling geof
  • G
    gnc replied to the thread a340 loom.
    thanks for reply, i decided to change to a manual gearbox geof
  • G
    gnc replied to the thread zf gearbox.
    thanks for reply, thats what i was thinking, i was also thinking that if i changed the profile of the the throttle quadrant it may alter...
  • P Bateman
    P Bateman replied to the thread 1UZ Pistons/Connecting Rods.
    Early rods are thicker and stronger than later models so they may be worth something to someone, someday. Toyota doesn't make these...
  • P Bateman
    P Bateman replied to the thread a340 loom.
    The main connector on A340s are all the same, but the pin configuration varies. All have 2 shift solenoids, but some have pressure...
    • PRND2L Switch.png
  • P Bateman
    P Bateman replied to the thread 1UZ into E36.
    Everything is back together now and I'm exploring all the tuning settings that DBW unlocks. Previously, the car was quite sharp on...
    • 20260213_202847.jpg
    • 20260213_202856.jpg
    • DBW1.jpg
    • DBW2.jpg
  • P Bateman
    P Bateman replied to the thread zf gearbox.
    Lighter flywheels are great in race cars but not good for the street where you need inertia. If the megasquirt is capable, change the...
  • G
    gnc posted the thread zf gearbox in Drivetrain.
    hello. i have fitted a ZF 310/320 gearbox, with the adaptor kit. and standard Sachs bmw clutch kit.+ a servo assist and a megasquirt...
  • W
    Has anyone bought or fabricated a hitch receiver for an SC430? I'm looking at a 2007 and I do a lot of mountain biking, so I'd like to...
  • P Bateman
    P Bateman replied to the thread A341e (30-41e) Problems.
    Not sure you'll get a response - this thread is 13 years old. Try looking up the part number here Toyota parts catalog
  • Lextreme
    Lextreme replied to the thread Power Steering Pump/Valve.
    Poster just referred me to this video for deleting the idle up valve.
  • P
    paolocaso22 reacted to jgscott's post in the thread Crank Shaft Trigger Wheel ? HELP with Haha Haha.
    I have a US Ver. 97 SC400 with a few mods and am running a Zex Nitrious kit. I am in the process of making some other changes and am...
  • T
    TASNZ replied to the thread A341e (30-41e) Problems.
    Hey @Bushwhacker, do you have a part number for that sensor on the right? It looks different to the other sensor. I'm helping with a...
  • Lextreme
    Lextreme reacted to yesman8326's post in the thread 1UZ Pistons/Connecting Rods with Like Like.
    Hi all! Just recently found this forum group, and am excited to be here. I'm posting to get yall's opinion. I have a neighbor who is...
Back
Top