Search results

Take a look at this page under the steering column. http://www.rockauto.com/ref/Cardone/Detail.html?261620.jpg They talk about a filter. You should be able to find one here: https://www.rockauto.com/applet3.html Keep us posted on your progress...

Do you think you changed enough fluid? Since the old pump was grinding, maybe you have some debris in the system. I would try flushing the system again to try to get the fluid looking and smelling good. Are there any metal particles in the fluid you removed? My '91 still has all the original...

Did you change the fluid? The fluid on both of my cars ( '91 and '94) looked and smelled fine when the pump was replaced. I didn't let the old pump get too bad before replacing it. It was just leaking, but not making any noise. You may have contaminated fluid if the pump ran dry between...

Glad to hear everything turned out OK.

On my '91, the pump itself was leaking first. I had purchased a seal kit from Lexus, but had not installed it when the alternator quit due to leakage from the power steering pump. I bought a new pump and alternator. Sometime later at about 170K, the bypass valve started leaking. This lets...

I don't think it's a good idea to loop the hose from the air box to the engine vacuum port. I suspect this will make the engine idle faster. Normal operation is that when the pump is under a load ((turning the wheels), the valve opens allowing more air into the vacuum port and increasing the...

Toyota charges $75 for a straight wire sensor? That takes some nerve!

I'm wondering how the brake pad wear sensor works on a 94 LS400. Does it use a Hall Effect sensor? Does the pad wear sensor light latch or is it reset automatically when the pads are replaced and the sensor is further from the rotor?