Search results

Just wondering why you said 400mm at 2inch is unrealistic? What would you suggest 1.5" at something else?

Hi All Thanks for the helpful reply. I am putting my motor into a cobra chassis. And a stock exhaust is not going to work so i am design one of my own. Look at the firing order i thought crossing over would give the best performance from an engineering point of view (Mechanical Engineer)...

Hi I am currently designin up some headers and are a little confused at the firing order vs the exhaust header The firing order of the lexus v8 is 18436572. To get these to match and have the cyclinder pulse at equal intervals surely you would want to 1 with 6, 2 with 3, 4 and 7, 5 and 8...

Hi Guys I am running some altezza cop and have come into a bit of strife. Looking into the pins on the top of cop in its normal position, pin 1 on the LHS and pin 4 on RHS I have connected as follows. Pin 1 +12V Pin 4 Grd. Coil over heated when ignition was switched to on. Large voltage...

Cheers Mate

Hi Just having a look at a fuse box a bought to connect to my wiring loom. One of the relays is marked MG CLT. Does anyone know what it is or its function.

Thanks I have hopefully found some bits and piece from a donor car. Will see how that pans out. What should i grab from the car if i can? Fusebox, all the relays etc....

Hey thanks for the reply. I bought an engine that doesn't have a fuse box or any of the relays. Would you be able to suggest a place in NZ that would do a new fusebox or a good auto electrical shop to get one from?

Hi This link was really useful just noticed you didn't talk about the circuit opening relay. How does it work and what is it association with the cold start injector if any.

Hi Thanks for the reply. I had a look at your one and the colours don't seem to match up very well. The Numbers on my 1UZFE ecu are 89661-30740 175000-6180 40P 40P 40P Any thought would be helpful.

I have attached a spread sheet of my 40 40 40 pin computer. I have been looking though the other forums and their wiring diagrams and none of the colours seem to match up. I was just wondering whether anyone knew whether there was a wiring diagram that matched up with this one? ( The guy i...

Hey just wondering if we could set up a link with lots of suppliers in nz for the uzfe parts. I have got a few things to grab now that my engine has been stripped apart. I.e. piston rings, water pump, oil pumps gaskets and bearings. Looking at putting my engine in a cobra. There was a guy...