Search results

Thanks for the kind words ZUFFEN, we have to catch up again soon. I've gotten a tougher and more credible H-D now to that you would be proud of as it is designed by Porsche !

The "EGO BOOSTER" 1UZFE Trike Sorry I have not posted for so long but a quick reply before I head off to the UK for a while. The tube I used was 35mm Nominal bore Seamless boiler tube and it is borderline for a single tube set up but in a ladder as I have is more than enough. The Goldwing...

To All the avid post watchers. I am not dead, just sleaping ! The trike is progresing slowly, it has fuel tanks now and awaiting tank fixtures and plumbing. H-D project is all but over ( Awaiting insurance ) but running fine now. I will be calling on ZUFFEN soon to wire this baby and get...

More Appoligies To all, Sorry for the delay to all that are watching this space. Espeacially you LEX. I thankyou for your kind words to Zuffen WRT my trike. I think he is looing at a bike next after his DAKAR Racer. I have not progressed much but am at a stage now where all I have to...

Latest Update Sorry for all you out there wanting to know how it is all going but I have sold up house AND shed so I have very little room for tinkering. I am still sorting sheds and unpacking boxes to get them out of MY garage. I am still waiting for some time to build a tank and then...

I am way to old and stupid The MAD MAN is 34 ( 35 way too soon, OCT) Married to wonderfully accepting wife of 8 yrs ( together 17 total) 2 kids Boy 6 (soon) Girl 2 (soon) PLEASE NO MORE Sacrificed a few projects when I sold my house (2 car garage and 7x7 shed with mezzanine floor), 27 and...

Give this guy a call up in the hunter valley. His name is John and he imports a lot of cuts but I am unsure of the body parts. I am sure he could get some though or know where to go. His number is 0421274420. Good luck THE MAD MAN

After Information To the sand gropers, I was once a sand groper and all my family are still there but I am after some information with regard to rego for trikes in WA as I may have to take this 1UZFE powered beast interstate to register it. If any of you guy's and girls have any...

Seen This Before Hey ZUFFEN, I seem to recall a similar question asked of this hole some time ago. I recall it was on a LEXTREME Trike and it took a while to source an answer! I am glad you have this site in your favorites and make such a pasion for knowledge of the 1UZFE your...

Slow going Sorry about the lack of updates but as stated earlier in this thread, this is a slow project for me. Thus far it has taken me 9 years to get to what you have seen ( IF YOU WENT TO THE LEXTREME DAY IN AUST) and read about in past sections. I am having some problems in the design...

Sorry Lex, Sorry for the lack of updates but work has got a little hecktick and with the H-D project nearing end I have been neglecting the 3 wheeler. I do however have managed to get the basic lower frame made and am working on the mounting of the engine ( the cross bar and mounts are...

ZUFFEN, I too will be there with what I hope to be a rolling trike so I will have a car trailer available for around the area use if required and a crappy EA falcon to tow it with if needed. THE MAD MAN

Guy, You will probably find that the ECU,s are from a cressida import as they run a seperate ECU for the engine and the gearbox. As for the engine plate No I am unsure. Send ZUFFEN a PM and he may be able to help or infact drop mad dog a line as he is good with these things. The MAD MAN

Im not the only one Sorry I am not who you thought I was ! I am sure I am no the only one doing these but I am one of the few who is running a lexus motor. I have friends who have a 5.7ltr LS1 from a monaro ( new model ) in one similar design but with a nissan GTR rear end. They have been to...

I'm BACK To all, Sorry I have not been around to respond / reply to your PM's but I have been at sea off darwin for the last 2 months. The project has not gone far but is progressing slowly. The lower chassis / frame rail has been bent up on both sides and now awaits duplication and...

For the trike I too am interested here in Australia but how much space will it take up on my trike. See thread 1UZ trike here ! I need to get it registered as a standard engine but am looking to do this after that if the price is right. Let me know THE MAD MAN

Project GO AHEAD To All, Thanks for all the info in the past and I have just had a meeting with my engineer and he approves for the basic project design. That means it is all go from here with the building of the frame and the running of the engine for testing of it. I am very much...

Still trying to sort delivery to Melb for you but you are not forgotten. I am also still waiting for an ALT for you as ell from my mate. Will let you know when it shows up. THE MAD MAN

Lex, Just posted a reply to Zuffen WRT the pipe, I think I will jist do away with it all together ! Thanks for the info as it will clean up the top end of the donk for me. Hope you checked out the pic I posted so you get a feel for the rush I will get firing that baby up on the tar ...

To ALL, Have not yet had the engine started and the frame is still in the design stages as the engineer is visiting June 4 to sort some litle probs with design. My trip away has been postponed till 21 June so more time to clean things up and procrastonate some more. I am thinking I...