Search results

Ive used the crown pedals which the patrol booster doesn't fit

Crown Royale brake booster needed I think I broke mine Central coast / Sydney

Thanks Im using GQ Patrol axles they are right side drop, I have had an adapter made to fit the lex auto to the hilux transfer More photos here http://www.4wdlinks.com.au/gallery/album713

If i was getting a new one machined I would have only 4 teeth on the pulse gear? Would it be the same length tooth (2-3mm from memory) with a long gap, or longer teeth? Speedo sensor will run from transfer, no backup to ECT For tiptronic, do you use the stock shifter with a switch for auto or...

Im getting the adapter made up with the 32pulse sensor fitted I assume this is what the ECT requires, or at least can be adapted

lol Bummer Thanks for the tip

The speed sensor is on the transfer output shaft. It reads speed normally, but I doubt the auto will understand a 4th gear top speed of 50km/h I can have something machined into the adapter, but a plug in item would be simpler

I assume your converter senses when low range is engaged and adjusts the signal based on the (programable?) low range ratio This may well be my solution Could this be used to correct my speedo reading?

Ive got a crown one in good cond, on the NSW central coast $300

Cebby, i hadnt noticed one near the bellhousing, i doubt it could be speed though, its on the wrong end of all the gears Thanks Sideshow, im planning on running the complete crown setup, of course i havent thought about that yet, ive got to get the engine in first. How much for your device...

I was told today that the ECT does not need a speed imput to function, is this true? From what youve said Peewee, the 32 tooth sensor is needed for the ECT, and i wont need the worm drive as the transfer case speed will be used for the speedo I wont use the abs as i dont have any wheel...

Can I use the abs sensor for the ect? It will be easier to recreate the same pulse rate at the larger diameter required by my adapter

So the spiral geared drive is speedo which means the 32 toothed gear is for ABS

How did you go with this Bubs? I need to do the same thing to mine How much do you actually need to pull apart, are any special tools required?

Which of the two speed sensors in a crown auto does what? I plan to adapt the A341E gearbox to a hilux transfer case and want to know which speed sensor is needed for the ECT. For the dash speed I will use the transfer case speed sensor. I assume this will this plug straight in? Speed sensors

It has begun http://www.4wdmonthly.com.au/forum/showthread.php?t=27929

I plan to adapt my crown auto to a hilux geared transfer. The cost of getting a surf gearbox then an adapter to a gear driven transfer is significantly more than a custom adapter from the stock toyota box to the transfer, including a shaft respline. Does the ECT need a speed imput from the...

It appears from the photos that the mid sump is narrower than the others, is this true? If so does someone have a width dimension for it

There will be absolutely no suzuki parts in the drive train :no: I was thinking hilux transfer and I will need reduction gears, I want to know if the stock auto will be up to the task, or if i have to find something else Pics

Ive tried dellows and the guy said hed never even been asked about adapting the stock box to a transfer case. I'll try CRS thanks