Search results

Hi, I'm breaking a 1998 LS400. 138,000 miles, light front damage, runs and drives great. Can arrange delivery throughout UK and Europe if you really want. P.M with parts requests Thanks Andy

HI, Yes you flip the axles or diffs to get it to mainly in the right direction. I'm putting Toyota diffs into landrover casings, much stronger. It would be fairly easy to adapt to the Toyota box, I think the shaft would be the more complex, it just depends upon the sizes. The propshaft...

Hi, The ZF wasn't me, I've always been on this track. Mine is in a Warrior so is arse about face. V8 plus A341 plus Surf T box. The casing between gearbox and transfer box is 160mm long. I don't think the gearing will be an issue give the power increase you'll have. I'm just going...

Hi, I've done the conversion, do you want to know how long the casing is between the auto box and the transfer case? I can check it

Hi, I send you a PM.

Do you know what the parts weigh? I can get a courier to Aus for £20 up to 15kgs. Cheers A.

Sump HI, I've got a full front sump set up that I would happily swap for your rear set up. I wonder what shipping would be? I'll have a look. Thanks A

Hi, Does any one of you clever people know where I can get a Toyota 8" gear set with either a 3.58 (02?) ratio or 3.42 (01). I want to use a Hilux axle on the rear but need to match it to the front. Cheers Andy

Hi, Thanks for that, What is a cable line pressure trans? Is that the one with the pull cable for throttle opening? Thanks Andrew

Hi, Has anyone got any expereince of using a gearbox controller on an LS400 trans? If so the good the bad and the ugly expereinces would be welcome. Cheers A.:eek:

Hi Guys, I've just drilled the shaft on my A343 box, I went doen the middle from the cut end, they are typically less hard in the middle, got in about 20mm and found the void. Lets see how it gets on with oil feed to the bearing.

Thanks guys, I'll probably use a Spitronics box to control the trans. Cheers A

Hi, I have fitted a 4 speed trans to my VVti motor so I can use the Surf 4x4 System easily. The 5 speed i removed was completly electronic, however the 4 speed has something like a throttle cable hanging out of the side. What does this do and what should I connect it to? Thanks for...

Hi Dave, I have had the engine and box in once, made some mountings up and I'm ready for doing the gearbox mounts next. I am converting the auto box to 4x4 with toyota parts so I've that to sort as well. I've taken the ac pump off and moved my alternator in a similar way to one of the...

Could be the cable to the autobox? If so can you confirm as it will help me too. Have pm'd you my contact details

Hi Fella, Where abouts in Cumbria are you? I'm near Brampton. I'm just putting a VVTi engine and box into my comp safari racer. Lexus is new to me as well. I'm working on an aftermarket ECU for the engine and the gearbox so I can have push button gears. Looks like you could use the...

Mounts for Comp safari These are my engine mounts for my comp safari car, something similar for the gearbox end next. Heavy duty, but it spends some time in the air.

Hi Scott, I have one, do you have an alternative one to trade? Cheers Andrew

Hi, I'm putting mine into my Warrior (former Range Rover) comp safari racer. I'm going to aftermarket ecu for trans and engine. I'm converting the autobox to 4x4 with a Toyota transfer box, it just about bolts on. I don't think you'll find lack of torque an issue, these make a Rover...

Hi, I'm looking for a sump set up mid or rear for a VVTi engine if anyone has one, happy to import. Consequently will have a full front sump set up going spare. Cheers Andrew