Search results

  1. J

    1uz Fires, but wont idle, displays no codes

    will turn off strange as the FP and EFI B+ feeds aren't switched by the ECU? this setup is only temp, i just want to know if this engine will run still.. it will be re-wired properly into the doner vehicle at a later date.
  2. J

    1uz Fires, but wont idle, displays no codes

    so i've had a think and a play.. is this better? will change fuel pump arrangement when i wire it all in properly, tachometric relay or use ECU output
  3. J

    1uz Fires, but wont idle, displays no codes

    like i said it runs now that i've added 12v to the EFI B terminal, (isc valve at/solenoid etc) And now im getting some engine codes finally. still not a 56 yet, i'll fix that if and when it comes up.. gloverman, how did you know ive swapped the viscous fan out? anyways getting a code 12. so...
  4. J

    1uz Fires, but wont idle, displays no codes

    Cant be stuffed taking off the inlet to send you the loom, would rather send you the whole car! when i came to you i told you i'd already made a start on it, but had given up.. but since its not tow worthy i thought i'd have another stab for now, specially since i read your packing up shop...
  5. J

    1uz Fires, but wont idle, displays no codes

    Taking the loom off and sending it to him was the first option he gave me. but in all honesty, im not doing that now that its in the car untill the starter motor stuffs up as i dont want to take off the inlet atm. your link, ive scoured that for months, and have plenty of other wiring diagrams...
  6. J

    1uz Fires, but wont idle, displays no codes

    And sideshow i'll assume you'll read this.. Im the guy who is putting it into a 100series landcruiser. was meant to bring it to you to wire. No problems with your price, its just very far from being able to get it on a tow truck to get to you. if your bored and do house calls by all means...
  7. J

    1uz Fires, but wont idle, displays no codes

    hey all.. Bought a 1990 ls400 halfcut that i witnessed running. I've changed water pump, all belts, all pulleys. and now ive wired it up as per the attached drawing. Also added a 12v feed to injectors from key position IGN. Ignitors are bolted to the body, battery has lead from negative to...
  8. J

    Wanted 1UZ rear sump wanted cash or swap for front sump. SYD

    Hey all, I have a celsior front sump and want a rear sump, Would like it asap. if you see this post in a month from its post date i have bought a custom one for $700 from CDS. i can pay cash for your rear sump or swap and you can have my front sump. Located Near Penrith, Sydney...


Top