Search results

I fixed it, me being stupid forgot to block the icv pipe (no air intake at the moment) apparently they won't start with a HUGE vacuum leak....

I have 12v at the injectors, I'll try listen to them need a 2nd person to help though so swmbo will have to help when she has 5 mins. The plugs are very wet when I've been cranking it so there is fuel in the cylinders.

Cheers guys, I haven't tried new fuel yet, it isn't throwing any codes, wouldn't have a clue how to get live data from the ecu......as for fuel flow and pressure no idea, but it seems to have a much as normal (at a guess seems to have heaps of pressure when i the crack the fuel rail bolts). And...

G'day All, I have a Crown UZ in my hilux which started and ran before Christmas (6 months ago), I've been trying to get it going again because I have some spare time and it won't start. It has fuel and spark aswell as compression and seems to crank well and it'll give the very occasional cough...

Fixed it it was a loose plug on the top coil :eek: It's been playing with my head for 2 weeks and took 2 seconds to fix :D :D

G'day all, I have an 89 Celsior/Ls400 which runs great when cold but dies and will restart a couple of time then not at all when warm (I can drive 4km almost to the metre before it dies and I have to walk home), I did a error check and it's giving me error 15 which is ignition No. 2. I've...

Only for the better:D

Hi All, My engine has a starting problem and is gradually getting worse any help would be appreciated When starting it will wind over for 4-5 second before starting with some help from the Accelerator, It also seems to be down on power and using alot of fuel (seems to run rich). No error codes...

Hi Fella's I'm after a AFM for my 1uz If any one has 1 they want to sell could they please let me know Either PM or call mick on 0408 410 853

Thanks i found one at a wreckers cost me a bit more then i expected but thems the breaks:shrug: they reckon they are hard to get because alot of 1uz's have leaky p/s pumps the drip all over them and stuff them So i don't need one any more thanks again guys

I can change it myself but I'm away for work, about 1000km/600miles from where the wagon is so I'll just get the auto electrician to fix it and I'll pick it up when I go home BUT I need one to replace it so that he can fix it Cheers Mick

Hi All my alternator just Crapped itself in Coffs Harbour and I'm in need another one so that i can get it home, if anyone has one can they let me Know how much they want for it so i can organise to get it fixed ASAP Please PM or call me on 0408 410 853 Oh and I'm in Australia Cheers guys

Hey Matt do a search for all the info you need But basically you can use all the 1uz gear AFM, ECU, alternator, etc but you will need an adaptor for you gearbox (from Dellow or CRS) Not too sure about the clutch some one else could help you with that one The diffs will be alright as long as...

My cousin had a turbo Sigma that i drove a couple of times, was 1/2 a length behind a 10 sec HQ Monaro at 200kph scary as S%#t fastest I've driven is 230ish in my old Commodore ute

It should have a G52 in it, you can use it with the V8 but they are known to break the R15#f from a V6 4Runner or T/D Surf are a much stronger box and probably a better choice

I have one if you send me your address I'll send it to you for postage cost's if it more then a couple of bucks

Give Athol Mullins a ring his number is 49 568 030 He is at Cardiff and was very easy to get along with, If its safe and legal he will engineer it and he was reasonably priced cost me about $400 all up with, engine, body mods, steering mods, Susp mods and wheels and tyres

Both the Crown brackets are different if you want brackets that are the same then you could use Soarer Brackets like in the Pic Lex posted up (The Alloy one) they are the same on both sides, I'm going this way as well because i keep breaking Crown mounts Who is engineering it, if you've got...

G'day you wouldn't happen to have an AFM that you could send to Aust? if you do how much $$$?

G'day all, I in need of a Air Flow Meter to suit a uzs131 (crown) has any one got one they want to sell (Preferably in Aust.)? if so could they let me know a price? Cheers Mick