Search results

Does anyone have a rod and piston I can 3D scan for prototyping so we can get these started. I am about to buy my second engine here soon, but wanted to get a good set of rods and pistons together before diving fully in. I already have the engine externally 3D scanned and wanted to keep it all...

Dont buy that link above^^^ it is a scam as I purchased it and they never sent any link

I definitely want one!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! How do we do this? I need to get with you on some specfic dimensionality about some flywheel stuff! [email protected] is my email please contact me about this!

I'm currently using a stock NA/2JZ power steering pump on my 1UZ swap. it is out of a Lexus SC300, why doesn't the stock 1UZ power steering pump work on this swap??? is it an interference issue?? different lines?

Oh I forgot, Yes I do the Flywheel adaption as well , I usually use a 11lb chromoly flywheel to start and mill it out to fit the 1UZ crank, which is also the same crank as the late model 1UZ and the 3UZ, so any aluminum block UZ will work with this flywheel and Pilot bearing setup that I...

Well the price and type of material used is a case by case basis. It all depends on how much room there is to work with, how many other aspects of the drive train are affected by the adapter plate, and how much torque you realistically want to run at the rear wheels. if you want a quote on an...

I recently did a 1UZ-FE swap into a Nissan 240SX and it turned out very easy. I make adapter plates for just about any transmission you want to run. In this photo I have an SR20DET transmission bolted up to it. I've successfully mated together the 350Z 6-speed and the R154 5-speed all to the...

I'm running a Walbro 255Lph pump on my 1UZFE powered 240sx and it runs pig rich all day long at idle. it reads out 13.5 AFR and when cruising its right at 14.7, but at a stop light or whatnot my eyes burn due to the excess unburnt gas being expelled from the car!! the factory fuel pump has a...

I recently put a 1UZFE Motor into my 240sx(US model) utilizing the kinda stock SR20DET transmission. I engineered an adapter plate that mates the whole setup together. I also make 1UZ adapter plates for the following transmissions: 1UZFE to KA24DE 1UZFE to SR20DET 1UZFE to 350Z 6-speed...

It looks like you have a Summit racing credit line, going by all of the traction equipment on your car. I looks very nice and proud to see someone doing more of these swaps! I have engineered my own adapter kit for use with the SR20det transmission, or the KA24de transmission, or the 350Z...

I called AEM technical support and the tech guy referred me to your website. MPtuning.net I think. I just thought I would mention that. That makes plenty of sense with the AEM timing, and the function of 0 in the number system. It's also convenient how Toyota decided to make 1st gen UZi...