Search results

thaks CRIBBY for the info cheers mate Tanks for the info mate saved me a lot of time stuffing around .My engine is runing great it just has a tick on the right bank. I can live with it. thaks again.

Hi hope all is good with every one just need to know weather the over head cams on a 1uzfe have ajustable rocker gear and if so does any one have clearances I have a slight tapet noise on right hand side of engine. I have had no luck geting hold of a work shop manual.

It is cheap and easy to do . Go to **** Smith and bye a 3amp 5kohm potentio,meter. This is ajustable from 0 ohm to 5000 ohm. Hook it up to the ecu engine temp sensor located beside the temp sender for the temp gage. I think of memory I have mine set at about 2100 ohm withch sets timing at about...

I have bean playing with a couple of things the engine temp sender for the ECU I have found that it ajust,s engine timeing so I tryed a few things. Find the resistance of sender cold and hot cold was 4170 ohm hot was 2600 ohm so I got a 3900 ohm resister and put it in the end of the senser plug...

reply to Madmont Yes I do have exstractors system and modified air intake.

Hi just wondering if any one has had this problem ? I have a 1uz when it is cold, not stone cold just before it gets up to full running temp, I have very good acceleration. It is very responsive from a standing start, it will spin wheels well in to second gear and does not ping or anything out...

Hi just wondering if any one has had this problem ? I have a 1uz when it is cold, not stone cold just before it gets up to full running temp, I have very good acceleration. It is very responsive from a standing start, it will spin wheels well in to second gear and does not ping or anything out...

Ok i will check to see if it has power thanks again mate will let you know how it go,s

Thanks for the info gloverman I had an auto electrition wire it up BUT he has not had any previus experience he was the only one in town that would even consider looking at it so it is very possible that is not wired up corretly the nearest person with knolage of these engines is about 6 hours...

thanks for the info jibbby as it turns out it is a problem with the idle air control valve is drawing to much air so I have machined an air bleed to put in the line and that has fixed the problem. It is running much better and is a lot more responsive from a standing start. It spins tyers...

Hi I,m new to this site and was wonderig if some one out there can help .I have a 91 model mx83 cressida and have fited 1uz-fe and gear box out of 94 toyota celsior half cut . I am having truble with idleing hi about 1500 rpm and serges to 2000 rpm in park but not in gesr but still idles hi any...