Search results

im running my 1uz with cam cover breathers open, is there any advantage / disadvantage to this. nothing coming out geof

hello. i have fitted a ZF 310/320 gearbox, with the adaptor kit. and standard Sachs bmw clutch kit.+ a servo assist and a megasquirt ecu. in a cobra replica. the problem i have is that because maybe the flywheel is lighter its easy to stall it, and the throttle appears very sensitive. that...

got a few assorted parts from 1uz engine, gone separate ecu so its ignition and engine cover bits. i have pics if you send email address

ive put a manual zf gearbox on my 1uz. and megasquirt ecu but the throttle pickup seems a little sensitive on initial pull away, is it because theres very little flywheel with the conversion fitted. or is there something i can do with the cable throttle thanks geof

iv got a 1uz in a cobra kit car, it appears ive got a squeak from the water pump, is it a timing belt off job as well. and im not quite sure of the years of engine, are the parts all the same? The engine number is 1UZ-0397897

iv got a 1uz with the a340 transmission in a kit car. ive had a stand alone ecu for the engine fitted and i can only change gear manually. !st / 2nd and drive. i asked the engine tuner to fit a transmission controller but all contact has been lost. i crawled underneath to see if i can match up...

hello, i have had an EXTRAefi ecu fitted ( and the lexus one removed ) to my 1uz engined kitcar, but i now have to manually change gear , 1st, 2nd and top. no overdrive / eco or power and no lockout for the starter in gear. it was a rush to finish before his holiday and get it to MOT. so i...

hello, i have a 94 1uz engine and box in a cobra replica, ( i didnt build it ) the overdrive has stopped working, only diagnostic plug i can find is the one on the engine, and theres a little bulb thats been stuffed behind the dash. ( not the neatest of wiring ) from what ive read i can cross...