Search results

clutch and flywheel are sold , only thing left is the w58 to 1uzfe bellhousing adapter. thank you donnie

the clutch i think would work on a r154 but the adapter plate will not

i would say no on the trading . im going back to a 2jz

sorry clutch and flywheel are 7.25 not 7.5

i have a 1uzfe bellhousing / adapter plate tilton flywheel , quarter master twin disk clutch and howey throw out bearing for sale. the clutch is brand new its a 7.5 twin disk ralley the flywheel is also so brand new tilton you use your stock flex plate for the starter the throw out setup is...

found one local thankx tho

i need an upper intake manifold for a 1uzfe 90-? ls400/sc400 im not looking to spend alot so let me know what you have thank you donnie

are you going to be using the manifolds in your 240 ? if you are going twin turbo ill send you some pics of my setup

those are what im looking for but im hoping to find some mint or near perfect ones. thank you for taking the time to post pics

what aristo motor are you going to use ? if its the 2jz you only need a safc /bbc and larger injectors to make 500 plus hp. from the questions you are asking you shouldnt buy a stand alone cause you wont be able to figure the wiring along with tuning it. if you are set on getting a...

thats what i thought, I have two hls vpc's for sale for the 7mgte that would also work and use a map sensor and air temp sensor

well the supra people are using the ls400 afm on the 7mgte and they make a maft for the 7mgte so i dont see why it wouldnt work

I have for sale a hks vpc for a 7mgte with all sensors and two chip sets (stock injectors and 550cc).I have two head units i have to check on the sensors for the second unit . you will have to wire into your wire harness as they dont make one for the 1uzfe. I haven't had them hooked up on the...

I have a brand new 1jzgte r154 bell housing from a different project for sale looking for $350 shipped in the US. Im open to offers if you would like pics please send you email address Thank you Donnie

thank you . I think im pretty much set on finding one. for your knock problem ,Is it under load ? if your a/f is fine in that area pull out some timing if it dont go away dont worry about it . every motor is different when it comes to knock could be lifts, bad motor mount , exhaust raddle or...

I have a few questions 1- the map i found on here what are the spec's (ie map sensor/injectors/na or turbo) ? 2- did you have to do any thing to any wires on the engine or just by the ecu besides the map/iat sensors like any pull down resistors ? 3- every thing i have seen looks pretty straight...

as stated im looking for some mint plastic engine covers , the ones that cover the dist/spark plugs the timing belt ones and any others. If you have some please sent pics to [email protected] thank you Donnie

after looking at your othere pics nice work would be an under statement. if you ever want to get rid it let me know -Donnie

if there is any tread that should be a sticky this is it !!! I would like to thank every one that had any thing to do with the diagram. -Donnie