Search results

  1. Q

    where can I get a small piece of 8 or 14 mm aluminium plate?

    Its not round. email me your phone no. and we can work something out. Thanks! Andrew [email protected]
  2. Q

    where can I get a small piece of 8 or 14 mm aluminium plate?

    What I actually need is a piece of 14mm. I have some 6mm here and was going to use a second piece of 8 mm sandwiched with it to get 14 mm( it's for a spacer). So I could use 4 and 10mm if its easy to get or 7 and 7mm. Any suggestions??
  3. Q

    where can I get a small piece of 8 or 14 mm aluminium plate?

    I need aprox 10cm by 15cm rectangle of either 14mm or 8mm aluminium plate. Anyone got any offcuts? Cheers, Andrew
  4. Q

    Supercharger!?!?

    Have a look at the FAT manifold also available from Bullet supercars. http://www.forcedairtech.com.au/ It has the advantage that it has a blank top plate so can have any blower you want bolted onto it. The rush one only fits a yella terra blower and no other eaton will bolt onto it. The fat...
  5. Q

    what oil are you using?

    Castrol recommended magnetic for my boat, so I am running on that at the moment. This may be a sin, however, I like to run one oil for everything on my farm and use castrol RX super in all our tractors, earthmoving equipment, trucks, toyota landcruisers and petrol motors. It is excellent for...
  6. Q

    local internet based laser cutting service.

    www.swiftlaser.com.au I herd these guys advertising on the radio. They provide a link to free CAD software to design whatever you want and you email them the design, get a quote and if you want the item, they ship it out to you.
  7. Q

    cost of getting a custom FI manifold made

    I have been doing some thinking How much would it cost to get a custom manifold designed and cast to suit a supercharger? Something similar to the FAT one, but with intercooler. Could a few of us contribute some money and get a several made at a reasonable cost? What is everyones thoughts?
  8. Q

    1UZFE Powered Airplane

    Would love to see more pics or video. How are you getting on? Cheers, Andrew
  9. Q

    Factory ECU & loom in a boat. Need help!!

    Need some advice in the boat section. The thread is below. http://www.lextreme.com/forums/showthread.php?t=4025 Cheers, Andrew
  10. Q

    Cost of Lexus motor in skiboat

    Nope, smc. The marine version is available only in the smc
  11. Q

    m112 manifold.

    Ultimately, we should be aiming for 4 to 6 litres of plenium for a positive displacement supercharger on a 4 ltr engine. Thats what the books say, but in practice we use whatever we can work around. Due to the fact that the eatons have a twisted rotor, I recon plenium volume would not be as...
  12. Q

    m112 manifold.

    OzVenom, Do you have any idea of the plenium volume?
  13. Q

    Seroius Gearbox Mods for boat use - Need experts!!

    Need some experts opinions. Would it be possible to cut away all the unnecessary clutch packs and planeterys off the toyota auto and end up with a single planetery with 2 forward speeds and a reverse (like a powerglide)? This could then be used as a boat gearbox. It would bolt straight on...
  14. Q

    Cost of Lexus motor in skiboat

    Going like a champion, how is the M112 treating you?? Would it be possible to cut away all the unnecessary clutch packs and planeterys off the toyota auto and end up with a single planetery with 2 forward speeds and a reverse (like a powerglide)? This could then be used as a boat gearbox. It...
  15. Q

    m112 manifold.

    Are you going to chop off the jag mounting bracket on top of the blower? Also have you got and close up photos of just the finished manifold? Did you measure the plenium volume? I assume the height of the manifold is the original lower section height plus the mounting plate thickness. Exelent...
  16. Q

    Cost of Lexus motor in skiboat

    I did mine as a soft clutch. From memory, it was about the same price as a chev for all the maranising gear, except for the water pump setup, as I have a custom cam driven pump. You can still run a belt driven pump. The biggest cost at the time was probably the ECU to run the engine, however...
  17. Q

    Twin Screw sizing

    Yeah, but if you go too big, you can go backward... Too much power draw Blower working at an inefficient part of its rev range. I'll be going on a stock motor with extremely efficient intercooling. What boost would this thing perform at and would it be too much for my stock motor?
  18. Q

    Suppliers of 1UZFE marine boat parts.

    Have updated info on original post.
  19. Q

    Standed ECU and loom in a boat??

    I have been going to post this topic for a while - it's a good one. I haven't set up a factory ECU in a boat but from my Autronic experience, these are a few issues you will need to deal with. I run an Autronic SMC Marine version which is fully waterproof. You can chuck it in a bucket of...
  20. Q

    Twin Screw sizing

    Just wondering, would a 2.3 L/rev Autorotor be too big for the 1UZ with air to water intercoooler running creek water from outside the boat through it? Would the smaller size blower 1.8L/rev be better?


Back
Top