Search results

Lex, I have posted this in the other thread but thought I would put it here too. The 1/4 water pipe that goes from the idle speed control valve through the throttle body and then to the rear water rail, is it realy needed as I want to remove it. Will it affect the idle control or is it...

Please see attached pic of the current layout of what I call the "EGO BOOSTER" The wife hates this name so I think it will stick!!

Lex / Zuffen, Was sorting some things on the inlet plenum again and was wondering if the water supply that runs through the throttle body and the idle speed controller is detrimental or can it be disconnected ???? It looks as though it only pre heats the items as it flows from front to...

XIRFOREVER, This is a Exhaust Gas Recovery valve, This is used to bring the engine up to operating temp quickly by taking exhaust gasses and directing them back into the intake. Once the engine is at operating temp this valve closes off and the intake is onlt supplied by the throttle...

Lex and Zuffen, I am still confused WRT this pipe ? I think Lex may be right in saying that it is the EGR. It is the end point of the tube ( cast into the inlet plenum ) that runs under the manifold from the left side ( ??? EGR ) opposite the throttle body. It has two threaded bolt holes...

Lex, I have a nother Question regarding the intake plenum ? on the rear this time is a tube that goes into the left side of the plenum. It is slightly larger in dia than your finger and has to flange bolt holes on ether side. Actual location on the rear of the plenum is lower left. I am...

Backspace, Yeah they are complete as far as I know. I have just got the engine myself and have taken the items off the engine. The donk was taken from the cut for me and I am in the process of getting hold of the rest of the cut for items I still need. I spoke to the guy I got the gear...

Hey Zuffen, Drop me a line on [email protected] as I would like to catch up and have a chat WRT my project noting that you are working from Turramurra. I live on the central coast and pass there every day. It is so hard to explain what you need and what is what via text...

Joel, I am in Sydney and there is a dealer / Yard that does only *** imports there called Big Boyz Toyz in Church street Parramatta. They are very friendly and have many "SOARERS" there to look at. There are many around Sydney if you look but try the above guys for a start at...

Backspace, Let me know where you are as I have all but the Alternator for you but could probably get one for less that that price you were quoted ! I am on the central coast NSW Australia. My Email is [email protected] or [email protected] I will get rid of it all for...

Thanks again and I have been cruising the site for a while and got most of the info printed off and am looking deeply at it. I am 100% it is a soarer engine as it was out of a front cut of said car ( complete) There is a lot of gear intwined in the loom that goes to power steering and other...