Search results

Hey, Anaema...you are absolutely correct....low rpm is not much danger on good rod bolts....I have arbitrarily redlined my motor at 7K rpm...won't know the good or bad of that until I get all the power adders on it and get it on the dyno to figure out where the power is. Wayne

Rod Bolts Just as important as the rods for a boosted application are the rod bolts...they will fail if not of sufficient strength when subjected to boost, high rpm or a combination of both. I have Eagle SBC forged H-beam rods and ARP L19 rod bolts in my 2UZ and I feel comfortable they will...

Hey screename....if you go to lextreme.com/tundra.html (or go to this site's home page and scroll all the way to the v8 fi registry and go down to Wayne Ryther and hit the link) you will see my 3 inch intercooler install. BOV should go in where you have room between the intercooler and the...

David...I think you are an instigator....:006:

John....you make my head hurt...:o) however, the bottom line is you say it correctly that the same percentage of energy is extracted as it relates to inlet/outlet tempature relationships.

Got one Yep...bought a system with upgraded turbo about a year ago from STS for my '03 Toyota Tundra 4.7. Just now breaking in my warmed up motor but after break-in, I will install the turbo system blowing into a TRD supercharger. Should be a fun ride.....:o) By all accounts, the Squires...

Hey John, Broke it in with all OEM stuff, no piggy back, stock intake, stock injectors, etc....about the only smoke I saw was from me spilling oil and transmission fluid on the headers...:o) Looks good...as a matter of fact, I was surprised at the lack of smoke from the exhaust....running a...

Plain Vanilla Jibby....I put it back together with the stock intake, etc....to break it in, so it looks like any other Tundra 2uzfe....nothing to take pics of....however, once I get the blower, nitrous and turbo in place, I will provide pics and hopefully..video. Wayne

After 13 months, the Mean Green Machine is living, breathing and running!!! May be the first civilian 2uzfe hot rod back together and running....but I'm not sure. Started up as soon as it built oil pressure. Found a couple of block drain cock leaks, fixed 'em, found a fuel leak...fixed it and...

Haven't tried hand shifting it yet, but I will :o) Still trying to figure out garage door openers, bluetooth, stereo etc. etc.

Picked up my 07 Lexus LS 460 today in Augusta GA and drove it home to Leesburg, GA (around 250 miles) and I have to say this is one awesome automobile. It's my fifth new Lexus (not counting my '94 LS runaround) and it is by far, the best! This is the 3rd LS and I've had a GS 430 and most...

Don't have to have money...just gotta convince the bank you will pay for it...:o) In fact, I would have money if I would get out of the Lexus and hot-rod business...:o) Sounds familiar, eh? Wayne

Too Cool!!! Man! Look at these guys come out of the woodwork! Fantastic! It is absolutely great to confirm there are other crazies out there who are willing to climb out on a limb with a chainsaw! I might be the furthest along, and will continue to post progress, problems, solutions etc. I...

Jibby...if you go to the FI registry, you can find a pictorial, not only of my blown 2uz, but of the stuff I am doing to put it back together...short story is using an upgraded STS turbo system...(turbo installs where the muffler used to be) and blowing it into the TRD supercharger. Nitrous is...

Yep Puttin' one together as we speak, guys...did you forget me already??? 2UZFE going back into my '03 Tundra. Go to FI registry and look up Wayne Ryther. I'm doing it for exactly the reason Cribbj says...need the SC for low end torque while the turbo is spooling up...we aren't talking...

Maybe not I don't believe the video tells the story....I have driven one and it surely didn't feel sluggish to me...in fact mine is on its way to Augusta for pickup on Tuesday..:o) I currently have an 06 SC430 and the LS460 seems more repsonsive and quicker on the take-off....Not that either...

David...I believe they are: 188 and 194 degrees duration at .050...Intake/Exhaust .314/.315 lift Intake/Exhaust

post is wacky Pls have patience...for some reason, the formatting in my prior cams post goes wacko when I actually post it...tried editing, but it still goes back like you see it. I still should be easy to pick out the first set of numbers is for the intake and second set of numbers on the...

2uzfe cams I had Webb Cams in Riverside hardweld and re-grind my 2uzfe cams to the following specs: Intake Exhaust Valve lift: .354 .354 Duration 234 degrees 234 degrees...

1uz heads on 2uz block? David, Great stuff! You're catching me too fast....although I am fixin' to drop the engine and trans in my truck...:o) Are these cams going in the 1uz heads you are using on your 2uz build-up? Wayne