Search results

Is Rick a distributor for Unichip? The reason I ask is that the Unichip needs to be programmed for your application and if he is not a distributor/dealer, he couldn't have done it. If he also sold you the FMU, then I'm hoping he would have programmed the tune for a rising rate fuel pressure...

I agree with David, although I didn't get an FMU with my kit, I am using my stock fuel pressure regulator and ran the hose to the boost side of my supercharger...idles at 36 psi and seems to see about a 1.1 rise as I go into boost. I see about 52 psi under full boost in 4th gear. I may go with...

I will take a guess here and say that STS probably stopped advertising the Tundra system for a couple of reasons....1. the same reason TRD quit making the S/C for the 4.7...too much chance for liability issues...we know the 2uz isn't up to the task of very much boost and if you are only going to...

Thanks for posting the pics, David. You docs are all alike...you don't pay any attention to us mere mortals...:o) I said in my other thread, I had by-passed the intercooler to see how it runs. I always had every intention of running the turbo through the intercooler. The reason I took a trip...

Pics for other thread For some reason, I am not getting the pics to work right...trying again....:o) Doesn't seem to be working....can anyone help? Just uploaded on tundrasolutions with same type of site management and went fine. Go figger. Wayne

Forgot pics :o(

For those who have been following the MGM 03 Tundra resurrection, I have the motor back together and installed (obviously), TRD S/C installed, Turbo installed, Nitrous installed (not operational at this point), had to remove my alcohol tank to re-route my intake pipe through the intercooler and...

Absolutely BRILLIANT!!!!! Had to get back on my chair a number of times!:laughing: :laughing: :laughing: :laughing: Thanks! Wayne

Too easy, Jibby....can you spell Banks TT SBC conversion???:tongue2: :tongue2: :tongue2: Wayne

Some quick calculations based on ET and weight (3700 lbs) come out to approximately 520 rwhp (614 flywheel) to run 11.20 in the quarter. I know my 240 Z weighs around 2835 with me in it and runs low 10.20's in the quarter and I have a dynoed 611 hp @ 6100. That is on a drag strip with good...

Many thanks David...coming from you, that is indeed a compliment! Starts and idles great..in fact, closed loop is pretty much running at 14.5-7 afr with no load and drops down to 14.1-13.9 as I start to roll into a little boost....as I say, when I run open loop, full boost, I am way rich around...

MGM w/4-bolt Main conversion As you can see, engine is in, supercharger, turbocharger, etc is installed, control boxes (exception of one which is on the way) installed, boost, fuel pressure and wideband O2 controller/gauge installed, electrical work done to control nitrous and alcohol...

Thanks, Jibby, I appreciate. Need all the luck I can get....will post when I have some news... Wayne

Thanks, David...I appreciate. I haven't played with the open loop fuel yet, so I don't have a map yet. I am tuning from the instructions provided by gadgetonline., but in the mean time, I am going to try the two maps you have on the site....one for the 315cc injectors and the one for the 270cc...

absolutely correct, justengt8...wrong terminology on my part. I am seeing pretty much a 1:1 boost referenced increase. Still surprising to me that I'm seeing afr so rich at full boost, even though I'm using 315cc injectors....I have not mapped any extra fuel in the split second...the only...

it's running Funny you should ask, Jibby....it's running...about 300 miles N/A, put the supercharger on and put about 100 miles while tuning, added the turbo system and just got through installing FJO wide-band AFR sensor, controller and gauge, fuel pressure gauge and boost gauge. I'm using a...

Many thanks for the Christmas wishes and the same back to you, Rod....I always enjoy your exchanges and learn a lot besides. Hope all is well "down under"...:o) Always wondered "under what"? :o) Best Wishes for a Happy and Prosperous New Year. Wayne

I'm a little afraid of the double-date thingy, Jibby...I think the leather would try to get back on the cows if we tried to get them in the 460...:o) But you are such a gentleman for sharing....

Ls 460 How about that Santa!!! brought me a pearl LS 460 a little early! What a ride!!! Man, I am sure glad Jibby has the girls so Santa isn't spreading them around :o) Wayne

Don't know a bunch right now as I just put the motor in a couple of weeks ago and am still in the break-in mode. Breaking it in with the stock intake, injectors etc. Once ready for prime time I will put the supercharger back on and tune it for that....add the turbo and tune it for both....add...