Search results

sure the subject's been on here once or twice, try a search. Now where did you put all the tutorials david? grtz Thomas

:bigok: BUSTED!!!:irked: nah no MC valve that's called wasting, far to much fun bolting them to 4age's I have a complete T-vis manifold in a box somewhere, I'll dig it up and take one of the butterfly valves, and make an ITB out of billet 6061t6. the thought of it working when lifting the...

@ cribbj, can you set the treshold of the boost diafragm in some way? the plan is to make the valve and housing myself on the lathe,(because I like that) and buy a diafragm from someone and mount it all up. what does such an bpv actuator cost anyway? Grtz Thomas

hmm nice! food for thought. I presume you could also use it as a boost limiter? grtz Thomas

@ Justin, What no way far to much $$$ offcourse, :biglaugh: care to share what you did on your set-up? I have the provision in the new manifold to get a butterfly valve installed in the bottom of the manifold, in the valley. I will only have to drill the holes for it so thats easy. I plan to...

Hey John, what the difference in the single and twin port? I run 2 superchargers in parralel so the act as one, think I'll be fine running one bypass valve, but need an actutuator to opperate. also what's the diameter of a normal M90 or M112 bypass valve, I can make the butterfly valve...

haha burnt the fingers then? I did:guilty: ........... several times grtz Thomas

heat the part and keep the tip of the stick that touches it in constant motion, that will help a lot. and don;t be surprized for alluminium to take a long time to heat up to the correct temp, I made a manifold for a toyota starlet 1.3 12v engine and the flange of the thing was 5mm thick the...

we have mini's spinning the rim inside the tire because of low presure, I can't see it comming off though. grtz Thomas

which one is teh boosted tundra's one??? I need two eaton style bypass valves for my project, and sofar only have found 2 company's selling the same thing, if there are more options please share. Grtz Thomas

AHHH please guys From day one I started on my twin charged project I allready told about this stuff. that's about a year back or so? I have used it to solder various things together, even a complete intake manifold, and loads of other small bits in mostly in cooling systems. it's...

Hey tony, As much as would like to go the classics once, it'll be the 24H again this year. who cares about cultured when you have pescarolo's singing, on the mullsannes with a beer in your hand? hopfully see you at the classics sometime btw. Grtz Thomas

any light shedding on it, being a complete new cast or regrind of the original lexus part? the price is very competitive. Grtz Thomas

stage WHAT??? (before anyone opens up a debate again hihi) anyway try here http://www.kelford.co.nz/ Grtz Thomas

as said: you can't fix a radiator capcity problem by upping the flowrate of the coolant being pumped through it. chances are it will get even hotter as the water than will come out of the rad warmer than it is now at lower flowrate. fit the largest capicity rad you can find in the space...

Hey Rydning, I have spoken to Mr Albertini at the motorsport expo in germany last year and this guy is obsessed with his creations, the cheapest at the moment is still at aroun 10K euro's, but you'l get some decent stuff which will be probably the best desinged compnent in the entire car. I...

@rydning, the UN5 does have a set of 4 spidergears in the diff instead of the UN! that has 2, but you're right the inputshaft breaks at 5th gear at the rear cover undercut in the shaft. Bell performance has nice stuff as do Tornado sportscars in the UK (same parts) Countess mouldings in...

the sump you're descibing is not something I'd want to run. if you cannot make it bigger and lower than it is now, I'd think again about adding an accusump. before you try to make a sollution that doesn't fix the origin of the problem you have, you might want to look to save the dollars on the...

now what was it the grey bloke always said? "I love it when a plan comes together!" Grtz Thomas

hmm point taken about KEP, heard it before but when it comes to $$$.... well you know! I still need to investigate the thicknesses of both plates, and go for the one that will leave enough space for a multiplate clutch, if the original fails. but first lets do the intake manifold and...