Search results

Hi mate , I know of a couple off LS400/Celsiors being wrecked , just yesterday [ sat ] I picked up a left and right hub arm with the ball joint disc and sensor for $75.00 each !! This was to make doing the right front wheel bearing a swop over job , as it turns out the wheel bearings in the hubs...

As an add on how about a place that can service my Celsior in Brisbane Australia ? A place/guy that knows whats what !! I can do all my own work but just haven't the time anymore , besides I'm getting too old to crawl around on the concrete , any big jobs like doing the cam belt I would do...

Quite right Zuffen !! I think my brain went on holiday for a bit !! Seems to happen a bit more often these days !! I should think a bit harder before I punch the keyboard .

I need to get some better brakes on the front and I'm looking at Supra TT 4 spots as they are a bolt on fix , however here in Aus-Land they are very hard to come by as every man and his dog wants them for the same reasons I do , add in the fact that they only came in on imports and 1/2 cuts...

?? Umm , I just thought I was missing something when reading this . LOL You can't get more lift than what the cam lobe gives you regardless of the actuation system , the aqmount of travel is set by the cam lobe , also unless you add to the lobe first regrinding it won't actually give you more...

Have now fitted a new Pioneer head unit , went in no probs , later I will fit an amp to run the sub-woof from the RCA outlet , might go for something real big to hook in as I update my 15 year old speakers .

I have seen one in a Datsun 1600 [ 510 ] and it was tight but went in ok , was stock standard including the auto , but did have a rack and pinion conversion , he ran it as a bit of a sleeper , I saw it at a servo !! in Jimboomba Brisbane .

Another option is replacement heavy duty airbags from Arnott Industries , they come with a life time warranty !! I know they are for the LS400 , but I think the SC400 units are the same ?? [ at least the bladder bit ?? ] $399.00 each for the front and $350.00 each for the rear , thats way I...

Anybody used the above ? I like my air suspension and want to to keep it , they come with a life time warranty and look the biz ? Plus you can replace them one at a time as they go so less outlay all at once . Any reviews ?

Thanks Mr Brady , no issue with clearance as it's only the actual mufflers themselves I've replaced [ which i didn't have in the first place !! ] so that is actually after the diff mostly , was actually going to go with 63 mm diameter tubing and bends but a 63 mm 90 degree 316 S/S bend was...

Had a chat to a guy who builds 1uzfe Cobra's and he's been playing with same for quite a while , his advice was to have the cone as far away from the reader as possible as it is quite sensitive apparently if you blow on it the engine will stall !! So if you have as much distance as possible and...

Thanks for that Brady , I'd always though the pistons were forged . Engines fromthe US are much more expensive over here , only now are Mustang front cuts and such appearing , there's a lot of these engines going in various cars and being left standard , a while back guys were/are putting 5 L...

When I bought my Celsior someone had stolen the rear mufflers and had replaced the mufflers with a 1 and 7/8's inch straight piece of pipe from about 3 inches after the last two bolt flange . I removed the straight pieces of pipe and had it just coming straight out just after those flanges ...

I've not had my Celsior long and I'm thinking of putting in a Injen set-up , I've read that these pod type units don't help much , so intend to have a feed in from the guard into as large an air-box as possible with the Injen pod in side of that , not looking for huge gains , maybe 3 to 6 HP but...

Thanks Lex , I'd had a shower not long before that shot was taken so thanks for noticing !! I thought the car was pretty clean too !! It's a 1990 model with 120,000 K's on it and standard apart from the 18" wheels and a Japanese ride height system , got some books with it and it's had belts and...

Last One !! From the back . Regards...Rich . PS: This is an awesome function !!

One more !! Another one . Regards...Rich

This is what she look's like . Oh , that's me . Regards...Rich

Bullet You need to have a look at the MX5 bullet site . They do V8 Soarer/LS400 blower kits for Aus $5500.00 still using the standard injection , gives around 400 HP , if you then use their pistons [ to lower the compression ratio ] and the Autronic controller plus what ever the sky is the...

Purchase price ?? Hi all , I'm a new memeber on here so won't get into the technical stuff , but over here in Aus I can go down to my japanese importer and buy a Celsior/Crown front cut with a 1uzfe in it and worlds best auto with everything needed to make it run for $2500.00 , that give's me a...