Search results

Hi, Yes the FD 1993 onwards

You probably know but the RX7 FD Automatic has a 3.9

This is where is gets confusing, everyone seems to call them something different. In Europe we only had Series 1,2 and 3. The one I'm interested in is the 93-98 the pretty swooping one. That link looks like a series 2 FC (I think its hard to tell) Have you done any later cars ? I just want...

Anyone ? They are listed for different engine sizes and years so there must be a fair bit of variation.

Hi guys I'm trying to find out any info about this swap. I have searched on here (and google) and seen that Hiper had one that Gloverman worked on but all the old links are dead. I also saw Gloverman say he was working on others but I can't find any threads. Also a couple of 'Starter' threads...

When searching try using 'Headers' and 'manifolds' too, might reveal more results.

Hi guys I've tried searching but it seems to be dead as it keeps saying "No Results". I'm using a 3SGTE flywheel which looks like it has been using a 225mm clutch but could take a 236mm. I see people refer to using a Hi Lux clutch but which one do I need there are loads of different models /...

Spot on ! It was a tooth out. How on earth does it jump a tooth with all that belt wrap ? Thanks

Had a bit of progress today. So I started with the basics and checked plugs (4 new, 4 old) and found the rotor arms are in a shocking state (I cleaned them up but will get new ones) I 'tested' both cam sensors and they both are giving an output. I then tried disconnecting the drivers cam...

Had similar on my BMW when batt went flat. On that, remove battery lead, wait 5 mins reconnect. Everything burst into life.

I got the error code 'meaning' off a Soarer site but I notice that the Error codes given on this site (for an LS400) are totally different. 13 - rpm circuit no.2 (does this means the left hand cam sensor ?) 31 - Airflow meter 51 - Switch condition (what does that mean ?) I'm getting a bit...

Hi, I've just bought a cheap Soarer '92 V8 and it has a few problems. It wouldn't rev above 4k but I found that the shielded twin wire going to what I presume is the cam sensor (below and inboard of the dizzy) had been damaged and the sheilding was touching the wire, I've fixed this and it...

Hi, Tony only just seen your reply. Thanks for the offer. PM'd Mark

Thanks. TBH as I have bought a complete car I'd be happy to keep the std ECU really but I don't really have the ability / patience to work out what needs to be connected and I can't seem to find any specialists in the UK (if anyone can suggest one that'd be welcome). And having seen a few Auto...

Sideshow - why do you say that, in what way is the std ECU better ?

Hi, I've been reading various threads for a while now and finally have taken the plunge and bought a V8 Soarer which I intend to transplant into a Miata. It seems to me that it will be easier to fit a squirt than to trace and wire in the std ECU. But obviously the squirt costs, so will it give...

Hi, I hope its ok posting this here. I can't find any UK suppliers for W58 adaptors nor 1UZ flywheels so it looks like I'll be importing both either from NZ or USA. Are there any other UK guys intending to do the same so we can split the postage fees ? Mark