Search results

Yep, water to air intercooler. the turbo outlet will pass between the engine and radiator to the bottom 2.5inch inlet. the core is good for about 600hp. 3in outlet to throttle body. i will need to modify the top endtank by turning it 90deg so everything lines up. i do have a very good welder to...

hopefully worked it out

fotos cant figure out how to include all fotos on one post..!

fotos the original 6 banger

Hey guys, thought i'd show you what Ive been up to for the last week. Component list goes something like this: LS400 Front cut HG Holden Ute JJR 560 turbo custom water/air intercooler front rack conversion rear crs sump Adaptronic ecu. techedge wideband o2 Nitrous express 150 shot bosch 044...

hey guys, was trolling through ebay and stumbled across these intercoolers. If i had not already bought one i would be getting one of these. check them out...

water injection is not bad for your engine so long as the system does not leak. make sure you have check valves and good quality solenoids. the worst case is if the system was to drain into the intake and hydraulic lock a cylinder - easlily avoidable with a bit of forethought. as for...

60/40 Latent heat of evaporation of water is the killer and saviour here. It removes energy from the intake charge (ie heat). This energy loss from the incoming air results on less energy in the overall combustion process, ie less power -(if all other reactants are not changed). The usual...

I cant find any comp maps for these, but my feeling is that a twin setup should perform as well as a single t70. i figure for the lower setup cost and ease i will go for a single.

so the best solution is...? Thanks Toysrme, i figured it was a chinese item and i know you get what you pay for. Still wondering if it would flow well enough for what i want though? If it does i will track down a good quality item. I have been looking over a few comp maps lately and with a...

forgot the link! http://www.ls1turbo.com.au/ttspecs.htm

Thanks for the reply toysrme, was starting to think noone would... Still unsure about whether they are a good deal. Gentt are getting good results on commondores, (check link) but your idea of getting some rebuilt has merit. I live in Darwin so that is always a challenge, can you recommend...

I read somewhere on this site that the AEM ems will plug into the 1uz harness without too much work... my question is which model -the stinger or the 8860? 1uz into HG holden ute, (twin turbo or single) manualised trans, etc... I'll only be using low boost at first (and possibly forever) so do...

Maybe two of these? http://cgi.ebay.com.au/JJR330-Turbocharger-with-Internal-Wastegate_W0QQitemZ120147457852QQihZ002QQcategoryZ72478QQssPageNameZWDVWQQrdZ1QQcmdZViewItem For the price they seem fantastic. Water cooler for reliability. your thoughts please? see also...

Hi all, just a few quick questions- 1. is this a good deal? 2. how will it go as a single on my 1uz? 3. if not what should i get? i'm after as much power as possible (obviously) but without losing low rpm boost and torque. 4. Another option is 2 jjr/ kkr330 turbos. thoughts anyone...

so the best solution is...? thanks for the info rms but you didnt tell me which solution you think will work best. feel free to tell me how to do it. how about 2 'VL turbo pumps Bosch no 0 580 464 070 rated at 130 l/hr at 3 bar pressure' running together? so i also need a surge tank supply...

Hi all, finally getting started on my tt 1uz hg ute project and need some advice on the fuel system setup. I plan to run a custom alloy tank under the floor of the tray and a gravity feed surge tank. I will be running twin turbo (most likely two kkr330) and also a 100-150hp NOS fogger. I am...