Search results

Exhaust System - Muffler

Exhaust System - Muffler ...muffler with custom V-Band flange, made of a 150mm SUS 316 shaft...:eek: another inside-view

Exhaust System - Turbo Back The following pics will show you the "making of" the turbo back exhaust system. The catback is made of 3.5" stainless steel pipe. The mufflers are made of 1mm thick SUS304 stainless steel sheet metal. 100 cpi Catalytic converter inside view of the first...

Downpipe Flex-Pipe...

Downpipe The following pics shows the downpipe which I made of 85x2 (mm) stainless steel pipe.

Intercooler Piping IACV installed, too...

Intercooler Piping One-Piece-Piping welded and complete... 90mm piping with TIAL Q 50mm BOV

Intercooler Piping IC Piping from the lower endtank to the throttle body:

Intercooler Piping I cut the cross girder to fit the rhds intercooler pipe from the compressor housing to the intercooler

Thank you, David!;)

Intercooler RH-Side Compressor Housing:

Intercooler lower endtank Core with mounting bracket and upper end tank. Intercooler mounting bracket

Intercooler lower end tank:

Intercooler The upper end tank baffle plates: ...and in the car again... the lower endtank:

Intercooler and some more pics ;) the upper endtank: installing the baffle plates:

Intercooler Hey folks, it’s time for an update. But at first, I wish you all a happy new year!! Today I would like to show you some pics of the intercooler. I bought the intercooler core from Bell Intercoolers in Texas (Boerne). If somebody of you need an intercooler core I highly recommend...

No, more than 500whp and 800 Nm TQ! :D Many thanks! Alex

Hey John, many thanks for your reply. Interesting statement you gave us with the Cup car builders story. That make sense... So there should be no reason to be nervous. Because the squirters are new I don't think that there is the problem with them. And the engine is still alive after 6k km and...

Hey Tony, yes you are right. The oil pressure isn't that high. I would be happy if I would see about 60-65 psi. I'm not really sure why the pressure is so low. Maybe because of the oil nozzles? Is there anybody who has the same problem? Thanks Alex

Yes, that's the 86-92 supra radiator. Up to know I have not the best results with this radiator when it's hot outside (about 25-30°C).But don't forget that there is only a distance of about 5cm between the radiator and the turbine housings and the downpipe. I think I have to cut some more...