Search results

i will just wanna find the right ones. i like the real slutty ones :p heyyyyy, im dirty and a man, but not old. only in my mid 30's ;)

;) definitely needed to take them for a cruise, wish it was a Powercruise or Supernats event :D one of the girls bf's or something was there. i think one of the boys still grabbed a number or something for them :p these girls were alot of fun, just a coincidence they were the same colour of...

round up from Jamboree, no PB's car ran consistent 8.4's-8.5's @ 165mph all day. had a couple of small issues, car is a bit unsteady in the deep end now. after the wheelstand a couple months back new shocks were put in the front so it doesn't want to pick the tyres up too much. we think it may...

we are very happy, just hope what it shows on the dyno it will show at the track. even Vince had a hard time getting over the power it made. his dyno has been right every other time. *touch wood* it is now also. last time on the dyno with that fuel it made a little under 800rwhp, but, at the...

back from V&E Rigoli, we went down this time with dyno compatible tyres :p and had Vince re-tune the car with the new ID2000 injectors, and needless to say we are very happy. Vince had the tune done nice and quick, the old girl is showing more power than ever before and drives better than ever...

with a turbo car you could throw a letterbox on and it would make a good intake manifold :p pretty much anything will work, question is just how well. we are happy with how it is going so far. we put the ID2000's in and went down to Vince's tonight to re-tune the car. if we didn't have bad...

we are gonna take the car back in to Vince's today get the injectors done and run it up. we have Jamboree on Saturday and then Vince has a dyno day on the Sunday was over 80 cars last year! there is definitely power to be made with a different intake manifold we have been discussing a few...

a compliment, they are very far and few from you :p new setup should be better, we have some interesting idea's brewing. this engine is pretty good, but, there is plenty of places more HP can be found. more efficient manifold design could pickup 50hp+ who knows. just gotta watch out for the...

ok, so not the type of update i like to report, but, we have always been upfront and shared everything. as you know we had fuel issues which included the pump etc. we went out a week or 2 back, fuel pressure was fine and the car didn't pop. but, the AFR was reading a point or so higher than it...

nothing wrong with the NA engine. brother has had one in his Corolla for 7-8 years, making over 1000hp. not a street car but has done over 300 1/4 mile passes and dyno runs on it. makes 900rwhp@36psi on E85 thru a Powerglide (turbo maxed out) ran an 8.0@174 best...

cheeky fuck :p

same Bosch 2000cc core and it is all flow matched. they actually flow 2200cc/min @ 3 bar not 2000cc.

finally a day with no rain, we got a chance to take the car out and test yesterday. a couple little pops during the first burnout, but that coulda just been the plugs getting cleaned out a bit. after that was no popping during the passes or burnouts, fuel pressure was up around 60psi, confident...

we are doing a new engine in a few months, but, keeping the old one as a backup :p otherwise we'd probably sell off the whole engine. shoot ash a PM he has some interesting methods of saving a few bucks using parts from other engine's etc. i think he uses a SBC rod which is half the price of...

when it breaks it definitely does a good job of making as much damage as it can.

keep us updated, Joe is in for 1 also :p around 6500rpm stall, shifting at 8000rpm. new motor will be more power so prob need to be tighter, they sell the stators on their own?

probably make around 500hp @ flywheel with 490cc

no, you will need 1000cc at least, look for an atomiser type injector Bosch 2000cc or Injector Dynamics ID2000, older style injectors tend to hunt when they are idling etc.. you need to make sure your fuel pumps are up to the task as well. you will need minimum 1200hp of fuel pump.

Jake @ Bain Racing www.bainracing.com.au he did brother's 1UZ heads, mild port flows well, port and cam package seem to be perfect. also Greg McDonald 'GOMAC' in QLD, he is our engine builder, has done alot of 1UZ engines for boats, has alot of experience. i don't think i have ever seen...

it's fun driving to and from the track, you go out run a few low 8's and people shit themselves when you throw on the street tyres and drive home ;) alot don't believe it till they see it, the thing drives so smoothly on the street you wouldn't guess it runs what it does. yeah saw James did...