Search results

I saving up $$$ for upgrade to 355mm soon. ...

The EVO disc size is 320 mm. I think it the same size as Supra unit. I like the 355mm dise set up that retrodrive have but it was too expensive. First I use paper cardboard to make template then send it to metal shop to have it made. Some washer was add to adjust the caliper.

custom made bracket, not looking nice but work fine...

Are you selling those car? If not why buy same model??

How much for GT42??? Look huge.... Is it same size as T51

Supra turbo weight at 3500lb and run 13.6sec. if my car run low 14. I will be very happy. FMIC already in place. Drive shaft was sent to machine shop - cut, weld, and balance. Who know final drive ratio of 1UZ. 2JZ is 3.769???

Over here MONEY make thing a little easier when facing with laws/requirements. If you know what I mean. It ran 14.6 at 1.0 bar of boost on 19" rim. I assume that if I switch to 17 wheels and 275/40 semi drag tire. The time should be much better. The twin nismo turbo kick in at about...

This financial drain project begin 2 years ago when I purchase this 66 Mustang. It was my first American car. The first day I drive it home and the engine broke down and can't find any shop who can fix it. (American car in Bangkok need specialty shop for serviceing, which at that time I have no...

I spend almost 2 years on this project mustang and still not complete..... the ride is nasty but caught attention every where I go. Might need to sell the Cedric in order to keep the Mustang. Cedric is as roomy as LS400, your kid should be fine in the back, the only thing I don't like...

The previous owner did most most of the work, and all I did to this car is replace worn out transmission and upgrade wheel to 19". I like JZX100 Chaser very much, and it come with 1JZ-GTE VVTI engine.

I use grinding disc to cut it, take about 20 min, though. It made from aluminium so it was easy to cut.

Thank for good comment. I just follow what retrodrive have done. He is true elite. Here some more pic. of Cusco strut bar(JZX80) and Greddy intercooler measure 24"*12"*3"inches. It have small dent on it, hope that it will not leaking. I 'll try to fit rear Brembo caliper borrow from EVO8...

1.Engine already in 2.Engine mount borrow from 2JZ -GTE vvti 3. radiator and fan from 2JZ - Aristo

The engine was installed today with big help from friend and shop mechanic. After the first try we struck with first problem the engine seem to hit the firewall, at first I think that I might need a custom engine mount. But after long discussion with shop mechanic, 2JZ-GTE VVTi engine mount was...

I like 6speed but my wife said no............plus I already have Nissan Cedric with RB26det and 5 speed......Twin plate clutch is the pain in the a*** to drive. So 6speed is not for me at the moment..... will try to work with auto trans unitl it broke down. Try to finish removeing the V8...

After month of checking out Retrodrive LS300T project, today I finally decide to follow what Retrodrive LS300T have been done..........I choose 2JZ-GTE instead of V8. I have some question I would like to ask ............ 1.Is stock fuel pump of 1UZ will able to supply 2JZ with enough fuel...

This is pic of my custom stero plate... made from wood and cover with black leather I also cut small opening for HKS electronic boost control...... for future turbo set up or 2JZ-GTE set up......... Anybody with good wood cuting skill will made this in no time...... cost just a few$ and look...

Very impresive number.... Wow... how you do that. What year is your LS? is it 430 or 400?

hi, check out Greddy E-manage www.trust-power.com/e-manI use it with my CR-V turbo set up and it work well.....with 0.7bar of boost and controll 2 additional injector. I didn't see that it have harness for 1uz-fe but somehow it have harness for VH45 (a nissan V8) so I think that it should work...

yes, in the name of Thai people Thank for quick respond I know that in that part of my country, they 're lack of facility that can hold thousands of dead body. And Australian government is among the country that respond quickly by sending couple of large container units that can hold hundreds of...