Search results

Wow, thats a series price tag. Are you paying for the 4:1 ratio or the durability? I found some RF shielded shrink that ran about $5 a foot but with standard shrink. I really like how you can smoothly shrink the cable + connectors. Very professional, especially with braided line.

Yep, and for the cash you'll end up investing, it wont be very many hp/dollar. However, for a DD, an m112 will require a tune if its any more than 7psi or so. If your not shooting for major hp, an M90 will work great and wont run out of efficientcy at 7psi but you need to know that at 7psi... is...

http://www.bulletcars.com/superchargers/toyota/lexus/soarer-v8-ls400-uz31-uz32-celsior-crown-1uzfe-htv1900-supercharger-system.html Bullet sells their manifolds w/o the kit but you'll have to e-mail them for Q/A. Manfiolds for the UZ are a bit pricey. With shipping from AU + tax ranges from...

I like the chameleon paint job. Looks clean with that Vertex widebody kit. Price is a bit high for a stock powered sc but clean nonetheless.

I know the DBW has a stepper motor that requires a decent amount of voltage. If there is a cut in voltage the blade closes. I swapped a VVT engine a while back and realized my aftermarket ECU did not have a high enough output to power the DBW motor. Is there any way that the voltage feed to the...

2.5" dual is way too big for virtually any N/A application. A well made 2.25" can flow over 400hp on a UZ. a dual 2.5" can support 500+hp. Even with headers you'll be trading response, low and some mid hp/tq for a marginal gain up top. Since your installing this in an off road application, you...

I agree that the car is ugle but im referring to the the engine under the hood. There have been 3 brand new DOHC 5.0L DOHC v8's that all have relatively the same factory ratings. Ford's Coyote puts down 412bhp + 390btq. Hyundai's Tau puts out 429bhp +376btq and Toyota's 2ur-gse puts down 416bhp...

Maybe when i get home in august. If I cannot sell my LS running i'll part it out. It has a lot of mods. When the time comes i'll put a list up.

If you need a strut bar, any sturt bar for the MKIV supra will fit. I have a carbon fiber JIC bar on my LS but the description a said supra 93-98 on their site. Congrats on ordering the rear sway, it makes a huge improvement over stock... it takes 75% of the body roll out of the rear of the car...

David, can you get a 185amp alt for an 80 series landcruiser or is it UZ only?

Looks like quite a bit of work but worth the savings no doubt. Is the trans/t-case out of the t100 a ditrect bolt in for the 4runner? Im trying to get info on swapping a uz into an 80 series landcruiser. Do you know if the stock trans from the sc400 will bolt up to the 4runner t-case? I know the...

No Worries Armed, very nice shot! I love seeing people really pushing the LS. If your cool with not having an all-out stereo, you can take out another 25+lb through removing thre sound deadening thats underneath the carpeting. Also, a full exhaust when done right can shed a solid 45lb as well...

Very clean LS James!

I know this may sound a bit "shady" but I promise it happened by accident! My gauge cluster had burned out needles so I went to a salvage yard for a working unit. I installed it and everything lit up like it should... however the early SC has its odometer built into the cluster so I ended up...

blue is "In" and red is "out"

Yeah he sure was. I picked a quiet dead-end street along side I-25 and as soon as I jumped out to snap some shots this cop stops off the shoulder and starts asking me what i was doing. He thought my car was broken down. Lol. I dont know why I broken down car would stop angled in the middle of...

Here's a few shots of the new hood and my HVAC deletion/gauge install.

The car wont see any freeway use until im back because im towing the SC behind a u-haul so i'll be safe until im back. Pins for sure though. Not skimping this time around. I am planning to order a bunch of thermotec heat insulation for my floorboards... ill have to see if they make an insulation...

Thats strange. You might want to have your fuel injectors cleaned and balanced. If one is flowing less than the rest due to carbon buildup or wear, a single weak injector can cause a cylinder to lean out and engine will knock. Of course a faulty knock sensor will also solve this. Easy way to...