Search results

4U2QUIK, thanks for your input and I'm sort of glad I'm not alone!! I also cut an inspection hole and have on occassion noticed the Howe unit move but always assumed it was meant to happen as the bearing would/should have found its centre and I have not read or heard of any of the issues you...

Correct. At the time I believed the flat face of the Howe bearing may have been the answer, but it was not to be. The domed bearing also resulted in the same problem and as I have already tried a Tilton and Howe, I'm leaning away from the TOB being the issue (or I could be wrong, again) Also...

Since completing my 1UZ/ W58 conversion some three years ago I have been frustrated by recurring clutch issues (squeaking and a sort of grinding and a loss of pedal smoothness). Different hydraulic throw out units, bearings and clutch/pressure plates have only resolved the issues for a short...

Any updates on either installation? Also interested in what's been done regarding the installation of a TPS.

Email with new address sent.

Would like to raise this thread from the dead as the IACV wiring/working is unusual to say the least. My searching has failed to find a definitive wiring solution even though it appears there are motors running around with the valve working with after market computers. Today I tested the...

Thanks. Its easy when you have a starting point, but I don't have a brown wire. Also the wiring diagrams on Lextreme that I'm using do not have the same colour combinations so without the drawing of the unit to go by, I'm unsure which is which. The TPS plug has the following wires 1-black/white...

If there's any hints on connecting the TPS and IAC that would be great. My wiring diagram has these two components missing.

I have a couple of places I have to take my car to over the coming month or so so the car will have to wait for its megasquirt xmas present. Will be interested to see how you go.

If the sensor is put at a merge, which is after the cat converters, does this effect the readings?

At this stage the final product is still in the planning as I'll concentrate on the ecu but I know it won't be over the top as I'd still like to use it around town an the occasional trip.

Speedlab, looks like you and I are at the same point. I've just received my MS-III with MS3X and am looking to set it up initially to run NA with sequential injection and CoPs, just to make things interesting. Once this is a proven runner, its onto the single turbo.:D From all the reading and...

How about these http://cgi.ebay.com/ebaymotors/OBX-ITB-INDIVIDUAL-THROTTLE-BODY-TOYOTA-v8-1UZ-1UZFE-/160636661193?pt=Motors_Car_Truck_Parts_Accessories&hash=item2566b0edc9#ht_2799wt_702

As with all things, the budget has a bit of influence when making a decision. It would be great to pay the $80ea that some companies are asking for new stock, or even the $100 ea second hand a supplier in AUS is requesting. Just the other day I missed a second hand set of 8 coils on ebay.com...

As far as I know the Toyota part number is 90980-11885 and looks like this

I've been researching CoP's from 2UZFE's and there appears to be a hugh variance in pricing. Here in Aus second hand items run to $100 each whilst new items from US range from $82 each to $195 for a full set of 8. All the items relate to the same part number but the hugh difference in...

Thanks for the offer. Looking at 8 new ones with new connectors at moment. If this falls thru will start with your 2 and work up from there. Cheers

barteldoo, as this will be my first stand alone its good to hear a positive result. Even though I'm look at the more comprehensive option of re-wiring, I'm hoping it will be straight forward if I take my time. Would be interested to know what base program you used as a starting point.

Devojet, the MSIII and MS3X looks good as I'm interested in going sequential injection and ignition (using 2UZ CoP) and from the info available this can be accommodated. Additionally, being able wire the motor to suit the ecu and run a wide band o2 controller, all for a reasonable price is...

Looking for a set of 8 coils plus connectors, p/n 90919-02230. Must be good working condition.