Search results

  1. Red Supra

    1UZ Vs. 3UZFE Crank

    Counter weights are smaller because the weight of the rods/piston assembly is less then the 1st gen 1uz. It would be more expensive to balance if your aftermarket rotating assembly is heavier then OEM.
  2. Red Supra

    1uz sitting lop-sided in halfcut

    I belive i have a 1U bellhousing that come from a sc400 (soarer) and it does not apper to have any sort of an offset to it.
  3. Red Supra

    Crank Shaft Trigger Wheel ? HELP

    Assuming me are talking about USDM toyota engines 1UZ to 1997 12 tooth trigger wheel 98 and up (first year for vvt) 36-2 trigger wheel Toyota 2JZ-GTE 1993-1998 12 tooth crank trigger wheel Toyota/Lexus 2JZ-GE to 1995 crank sync taken from distributor 1996-on 36-2 trigger wheel
  4. Red Supra

    1200+rwhp Mustang

    Hey Bob, did you see the patches Chris laid in front of our shop. Marko would be jealous if he saw em!
  5. Red Supra

    Rod Ratio

    Why would anyone expect a truck motor (KA24) like revving? :)
  6. Red Supra

    On Car Welding

    If you were to Tig with high frequency start i would be concerned about the ecu.
  7. Red Supra

    Extremely Nice Machine Work

    Great stuff they make, bet they aren't cheap.
  8. Red Supra

    GT42RS

    fits just barely
  9. Red Supra

    Turbo 400 Transmission

    The 1uz flexplate will work with a th400 converter made to work with a 2jz flexplate with very minor modification to the 1uz flexplate. Everything else lines up just right. Better yet, th400 converters for the 1uz flexplate are available from Supercar Tuning Center 847-640-7305 if you use their...
  10. Red Supra

    Update on SC430TT

    May be in the torque converter? Maybe they don't have VVT setup yet. I know the motec can do it all.
  11. Red Supra

    RDMs TT SC400-dyno results..

    Show us the RPM on that dyno sheet!
  12. Red Supra

    was able to take some better pics of the motor.

    Nitrous takes care of all the above negatives of a 2jz with a 88mm turbo. The most fun I ever had with my supra was when it had a 63mm turbo on it and the least fun when it had a 76mm turbo on it. I dunno about taking up less room under the hood. The only real advantage the toyota v8 has over...
  13. Red Supra

    i was able to take some pics of the 1uz when it came in.

    The AEM can be told, but telling is the hard part.
  14. Red Supra

    Corrola V8 thread..

    That's a mighty nice rear end there Chris and i'm glad to see those runners being put to good use! Thumbs down on that TB :mischievo
  15. Red Supra

    1UZFE Vs. 2UZFE Bucket

    Why? (10 letter min limit is gay)
  16. Red Supra

    1uz and 2uz wiring harness interchangability?

    The 1uz vvt harness can be used just like the 2uz harness. The best thing to do is to find a sc400 harness. Already has the right ecu plug and the right length. The body connectors must me considered as well.
  17. Red Supra

    1uz and 2uz wiring harness interchangability?

    They are not, the ecu is located in the engine bay for the 3/2 and vvt 1uz engines. The VVT engines have 2 more cam sensors for the vvt as well as wires for the solenoids, they have 8 injector and 8 ignition channels. Because of the different intake manifolds the wires are routed in different...
  18. Red Supra

    Lightweight pulleys for 1/2/3 uz motors?

    So what what your saying is that the plastic 97+ 2jz idler pulley is heavier than your billet peice?
  19. Red Supra

    Wet Sleeves

    Darton LS1/LS6 sleeved motors have had problems sealing in coolant.
  20. Red Supra

    IS200's 6 speed to 1UZ-FE ???

    For serious horsepower you just can't beat a Getreg V160/161


Back
Top