Search results

Koyo radiator with twin electric fans and a stat that opened at 75 ish were the only changes made. Temperatures sat at 85, rising to around 94 on full chat in short bursts. Long runs would have it creep upto 100, by this point both fans are on full tick (on at 87, off at 85). These temps...

That's correct.

Thanks for the comments guys. I'm hoping for 1100. It ran 980 on a pair of smaller turbo's. I'm awaiting new engine mounts and some ARP flywheel bolts.

The MS3 is what I'm running, along with 2zz coils. The 1zz coils will work fine but you will need to make mounting brackets to hold them in place. You have PM. Do a search on here for 1zz coils. Thanks Ben

Cop Hi Joe, I've a complete set (8x) of 1zz coils if they are of any help? Thanks Ben

Just got around to posting a project thread, I'll fill in all of the blanks tonight and do a full write up. For now, here's the only old picture of it that I can find: It currently lives in this:

What would be the recommended plugs to run on a 1UZ with ~20psi down it's throat? Thanks Ben

KS racing flywheel and clutch is about 400 quid delivered, you'd need a hilux slave cylinder too.

I've got one, I'm in the UK though.

I've got a pair of coils, the brackets need replacing though. Also a pair of igniters here with the bracket in good condition. All removed from a running car due to stand alone installation. Drop me a PM if you're interested. Thanks

As above, removed as gone standalone. ECU £50 + P&P Offers on the rest?

Any details on your setup? Injector sizes, turbo etc?

What condition are the turbos in? Only interested in them really, the manifolds need re doing. What else is included?

As above, preferably with cometic head gaskets.

Oh, your the one who bought the TT kit from Ryan, say no more!

That's not being banned from a forum, just the for sale threads. The reason for this was due to a complete and utter t0sspot on the forum who expected me to send an item abroad for the 3rd time, due to him "missing" the courier. The item in question was purchased from me for £120, then take...

Does this have the starter ring gear on the back? How much would shipping be to the UK? Thanks Ben

Care to point out a single forum I'm banned from? For the record, I'm the one who has supplied and fitted wiring looms for 3 UK Supra V8's so far this year.

How much for the heads? I'm assuming they can be bolted to a non vvti block? I'm using an aftermarket ecu to control them.

I've got one if you're interested.