Search results

I'll give you $50.00 plus freight for the steering column . Needs to come to Queensland . E-Mail me at [email protected]

I believe the Toyota Crown had the cast manifolds , a lot of guys here in Aus use them in conversions as they hug closer to the engine .

I use them all the time , send me an E-mail and we will sort something out .

I had a problem with my tach on my Celsior reading low , I pulled the dash apart and found that the needle was loose on the post , checked out where the needle should sit by looking at another Celsior dash then just lined it up the same and gave it a push onto it's post , worked out fine and...

Go for it MX73 , the price is quite reasonable but more than I want to pay just for cosmetic reasons .

Interested in the top manifold and the throttle body , I already have a set of rocker covers and need them so that I can have a set powder coated or anodised and just do a swap over . Make it all look betterer and pretty !! Need to come to Brisbane QLD 4207

I have done the 95 LS400 4 piston swap onto my 90 Celsior , in the most accurate testing I could do [ full on push on the peddle as hard as you can from exactly 100 KPH ] the car stopped 8.0 m earlier than with standard brakes , that's 26.2 feet !! Take in mind I have sticky 235/40/18's on the...

I like my air suspension !! I like it even though the replacement cost is initially high , after going to NZ to play with my brothers 93 LS400 with normal struts trying to lower it and yet stay with the ride he wanted means I like it even more !! The debate about air or no air will go on...

That's exactly what I was referring to !! Toe to toe indeed . As regards the moderators as long as it doesn't get out of hand a bit of agro is a good thing , if you really want to see some personal insult type stuff go to the MB forum !! Oh I forgot , you started some of that stuff on the MB...

Actually the calipers came from the States , don't actually know what year though , could be any from 95 to 00 . My brothers calipers came off a 00 ? No malice Jibby , just fun , I have seen from posts that you can arc up a bit , I like it , adds a bit of interest and shows some passion for the...

Maybe you should get a hearing aid Jibby , so you can hear better !! Both my brother in NZ [ 93 LS400 ] and I had to fit the later balljoints to clear the LS400 4 piston caliper . Apparently this doesn't happen with the Supra TT caliper , I believe the TT caliper has smaller pistons in it so is...

I did that swop on mine a while ago , very sucessful and well worth the effort . I had done wheel bearings on mine well before and fitted new bigger dust shields then knowing the big brakes would be coming , it was nice not to have to trim the shield and then bend it out to clear the caliper ...

89 to late 92 are the same then they changed october 92 and stayed the same till late 94 or there abouts . You could also use a Celsior ECU and MAF from the same years [ 89 to 92 ]

As far as I'm aware a code 41 goes to memory and can't be removed by disconnecting the battery . I have just removed a code 41 that was the airbag light . Go to www.lexls.com as their method works just fine . As a hint remove the 3 phillips head screws in the bottom panel and pull it down and...

Try Toyolex , they seem to have great prices on OEM stuff . I think you will find no aftermarket suppliers for stuff like engine mounts , not enough volume . also the originals have a pretty long life and do an aesome job , in this instance stick with genuine .

C'mom guys get a grip , either it's an inline 6 OR a V6 , NOT BOTH !! As a note the patrol has an inline 6 .

Thank's for the reply , haven't been able to find anything at all anywhere !! Maybe this will be a first . If I'd known you live in Ch Ch I would/could have paid you a visit , lived there for a bit way back and have been back twice in the last 2 months . My brother has a 93 charcoal grey LS400 ...

I will be doing a conversion with a Celsior 1uzfe into an e23 , the current engine is a front sump and so is the Celsior , it also helps that I have a Celsior so lots of spare stuff , even if I had to mod the sump it would be worth it to have all the ECU and other stuff the same . Question is...

I've got a couple of spare AFM's , off Celsior's , no idea on price make me a reasonable offer . As a note they were off running engines , I'm in Brisbane .

Look up above you feet when they are on the pedals , a bit towards the door as well , if you put the seat all the way back and then lie on your back with your head on the floor and look up and to your left a bit[ that's towards the door ] you will see a square box , you will need a 1/4 drive...