Search results

Cool, what year is yours? I couldn't get a Landcruiser kit, so I bought one from a Sequoia (US F150 sized wagon) and had to use aftermarket ECU. Have you actually measured 6psi? I only achieved 6psi with copious amounts of Belt Grip sprayed on, and no air cleaner. Does the drive belt touch...

I am running the same setup as you. My LX470 has 200,000km's on it, and is a 99 model. I run a TRD charger, and it makes 6psi from about 3000rpm onward, with the air filter box disconnected. All hooked up, it is closer to 5 psi peak. I also have Pacemakers, and a twin 2.5" press bent system...

I meant for more vehicle specific questions, ie: K&N landcruiser air intakes kits and other landcruiser/LX470 type questions. It's ok, they are rare everywhere, I hunt the Tundrasolutions classifieds for 2UZ parts, and they are rare there as well. I have just bought, and am waiting for it to...

Great site, pity there is a shortage of LX470/Landcruiser owners, or 2UZFE owners. But in general, the tech articals that Lex writes, are very comprehensive, and well done. Perhaps the classifieds could be broken up into Aust and US, as that is where the majority or members are from, rather...

It shouldn't drive any different to a sedan, as it isn't any different! It's hard to go past the 30% off that Holden are giving at the moment!

I'm in Vic, as per Profile. It is already a handful around corners, spins the inner front wheel, then the traction control kicks in.

Good on ya, but I will still drag you backwards around the block! Not interested about other motors....

It has 2 extra injectors in the manifold, to feed extra fuel. Anyone know what injectors are in it standard? All the injector places don't know, and want to reco mine, as they don't know what to replace them with. My brother uses the Snow water/meth systems, but they are exxy. Maybe I can...

rods that would be great, how much do they weigh so i can get a shipping price. Thanks heaps.

I have a 200,000km old LX470, with a TRD SC, Xede ECU, Pacemaker extractors with a twin 2.5" press bent exhaust. It made 6psi max, and 185rwkw. According to my trusty G Tech, it run a mid 16 sec 1/4 mile. I have coming a 8-9psi crank pulley, looking at a K&N intake kit, and running a pair of...

Are these still available? If so I would pay for P&H to Melbourne. I just want rods, are the pistone press fit or easily removable? Thanks

:hypnotized: Double Post....

I am looking for the following: Set of Gold Lexus badges for LX470 Chrome grille for LX470 Engine cover for 2UZ either full cover, or Tundra style 1/2 cover Will pay shipping from US

185kw at the rear wheels, dyno was 2wd. Running an Xede piggyback, tuned by cveperformance.com The 2uz rods are the same as later 1uz, but are pretty flimsy.... I am just about to order an overdrive crank pulley for the blower, will up boost from 6lb to 9lb's.... 200kw here we come!

Awesome, I will pay the money right now.....

Won't be offroading too much, may buy a sock for the Pod for if I do. Have to be careful of the stock internals, and the stock tranny. Mine has 200k on the clock, so is no spring chicken. Did make 185kw at the wheels though..... Standard they are 170kw at the fly, new. I am about to buy an...

I have been offered a overdrive crank pully for my LX470. It was originally purchased for a Tundra, but was never used. Are their different pullies? It was made by ASC apparently. The original pully is 5.5", the new one is 6", and should gain an extra 2-3psi. Has anyone had experience with...

I have a 99 LX470, with a TRD supercharger kit on it. It currently runs the standard Aussie spec round aircleaner, which just fits, althought the throttle body is now 1" higher, and 1/2 inch forward, of the original location. I need more airflow, but also want it to look fairly OEM, and am...

Yeah, all good, I have bypassed the boost actuator on the side, and used an aftermarket ECU (Xede). Made 185kw at the wheels, on a 210,000km motor.

It includes the loom, but the injectors are attached to the blower. There are usually a few blowers on ebay, in the US. I bought mine from Arizona, cost me $300 to ship to Australia.