Search results

I made the mounts myself. I used a supra R154 tranny and the rear tranny support from my old W58 as a guide and then just fabbed up some mounts that put the engine where I wanted it. Not as tight as some. I did not have to swap my break booster, or cut my sub frame. And I think that a stock...

Just got my 5 speed 1UZ-FE 1986.5 supra running last night. Sounds sweet, there will be pics and maybe a video soon.

Just want to say how happy I am with my harness. I was the guy with the 1uz into the MK3 supra mentioned earlier in the thread. I was amazed how nice the fit and finish were. I hope to be dropping the engine in in the next week or so and this harness save me loads of time.

As far as wiring I was not sure if I could splice the harness my self so I gave Phoenix Tuning A call. They can do a complete harness conversion for you. You just send them your V8 harness and supra harness and it will be plug and play when you get it back. Now I am not getting payed to...

As far as wireing I would recommend doing what i did and give Phoenix Tuning A call. They can do a complete harness conversion for you. You just send them your V8 harness and supra harness and it will be plug and play when you get it back. I had held off from telling people about them until i...

Is the bell housing still for sale?

I bought a brand new Cromoly 1 piece flywheel and clutch and pressure plate kit from XTD. Should hold like 325HP. I was going to mod the flywheel for my 5 speed conversion. How ever it turns out that I will be going about it differently and will not need this setup. They are still new and...

I am in need of a JZ to R154 bell housing for the upcoming 1UZ-FE swap into my MA70. I have all sorts of good stuff to trade as well as some traditional cash. I have the stock bell housing and auto tranny from the SC400. I have a 7M to R154 bell housing. A 2jz-ge engine, harness, manual ecu and...

I Am looking for the part of the mounts that bolt onto the motor and sit on the stock early supra mounts.

Looking for mounts for a 1986.5 supra. Also looking for any parts to adapt the 1uz to the supras R154.

I have been looking for a place to get the bell housing and flywheel in the us but have had no luck. I am looking to buy ether a kit or a adapter plate. I look at the thor plate but $600 is kinda steep for just a alum. adapter. Or if some one had cad drawings for a adapter i could machine it...

I just managed to get my hands on a R154 for $100. So Put me down for A R154 kit instead of a W58 kit. Any Idea on the ETA of those. Also do you still need the hole pattern from a R154? Now that i Have one i could probably help you out.

Why not just make a custom alum. block for a pair of 2jz heads and a custom crank. A custom block is not that hard if you keep it simple. Use a dry sump setup and external electric water pump. Use 2 2jz-fe heads with one of the distributors removed and the other driveing both heads. Set it...

If the M90 is still avable i would also be willing to buy it. I have the cash in hand.