Search results

Looks much better on your web site since the tables remained intact and everything lines up. I PM'd you a couple of questions on it as I am in the middle of wiring mine and of course there seems to be some slight differences between the the pre-89 and post-89 Supra wiring.

My setup: Bell housing adapter plate TTC Performance (R154/V160) Bell housing Adapter Bell housing 1JZ R154 bellhousing (7MGTE R154 bellhousing will not work with this setup I have listed) Clutch Kit Stage 3 F1 Racing Clutch Kit for MkIII Supra from Grip Force Clutches Flywheel Superrunner

Here is the 3D model of my '87 Supra mount. Not shown are the two shim plates (2 x 1/16") for fine tuning the center and level of the engine in the bay as well as the backing plate to sandwich the frame between it and the mount base....yes, this is a solid mount. I should hopefully have a...

Yeah, I'm wishing I had taken the BFH to the mounting points on the sub-frame in the '87 now. The interference between them and the oil pan flange was a treat to figure out how to get the engine to settle in to its spot and now it can only be lifted about one (1) inch before I have to monkey...

CJSupra is making mounts for the pre-89's now? If so, Peewee is correct, you should just buy a pre-made set. I'm going through the process of designing pre-89 mounts right now for my '87 Supra swap and it can be a pain. However, I am happy to say that the first prototype should be ready for...

Here is a model of the mount I am building for the '87. It is for the passenger side.

Wow! Awesome conversion! Love the video :)

Further progress. The engine has been centered and leveled within the engine bay. I have taken numerous photos of the engine mount areas as well as a couple of other areas to show various clearances and interferences. I have submitted drawings to my friend to draft up in SolidWorks which we...

A bit late, but here is the link to my pictures. I also took two short videos of both sides with my little digital camera since I could get it in close to the various areas. I'll post the links to the videos once they are uploaded. http://picasaweb.google.com/1uzsupra/SupraProject05282008

If you already have the mounts fabricated, then sure, the engine can be installed without the tranny, although you may have some difficulty with the top couple of bolts when you reinstall the transmission not to mention the oil pan flange being wider than the subframe mount points on the '87 (at...

I was wondering about that since you said your last run was the best, yet your 60ft time was a bit high. This is with the W58 transmission right? Which differential do you have installed? Based on these times and speeds, what do you think your 1/4 mile stats would be? Congrats on getting...

I say boost it. If you want to conserve gas, keep your foot out of it on those days ;) BTW, premium just hit $4.09 during lunch today here in Allegan, MI and I don't even have my Supra back together yet!

Today was the day we finally dropped the 1UZ-FE engine into its new home, the 1987 Toyota Supra. Having been the first time I have attempted this swap, it took approximately five to six hours to hoist the engine and set it into the engine bay. Some of the complications observed during this time...

How's the supercharger install going? Were you able to make it out to the show you spoke about on the phone? Any measurements for those motor mounts yet? Lots of questions ;) My UZ is being dropped in this Saturday and squared up to start mocking up mounts and sorting the wiring. I should...

Excellent pics, thanks for sharing! I am getting very close to finishing up mine now. Dropped off the high pressure PS line at the local shop to have it rebuilt and have the rubber sections installed with JIC fittings like GT400's line. Engine is being dropped in on May 3rd as long as it...

Sweet picture! I can't wait to get mine finished. I have May 3rd as the day I am finally dropping the engine into its bay. Hopefully the parts I purchased from Lextreme will arrive before then :)

That is a new project just waiting to happen then. Time to pick one up! ;)

Where's the Supra?

Great idea Jake, I'll mirror the list from my site as well (already have a link to you)! Name: Mike Long Car: 1987 Supra 7M-GTE turbo (MkIII) Motor: 1993 SC400 Transmission: R154 Date completed: current projected completion - May 31, 2008 Web site: http://1uzsupra.com (I am the administrator...