Search results

No worries. I will try to find both ratios and try them out as I don't have 4wd working yet. Also, the 4.1s are from a 4x2 so will that bolt straight into a 4x4? Thanks for your help mate

Cheers mate. Been doing some more research and some people have used the 4.1s Do you think that the 4.1s would be okay for a 5spd 1UZ? I don't want it to be too much of a slug. Was really aiming for better low down torque and low revs at 100kmh

And with 33s? Would it be higher revs or lower?

Haha yes, tempting to give those wankers a run sometimes. I've already got the R150F gearbox in mine and the hilux is a SFA running 4.88s. So if I get the 4.3s, how much do you reckon I'll be sitting at if I'm doing 100kmh? Transfercase wise, I'm looking for a gear driven one to swap into my R150F

Mine at 110kph in 5th would sit at around 3300RPM.. Have read through some research that some people have got their trucks to sit at ~2300RPM @ 100kmh on 33s and this hasn't drastically affected their off road capabilities either. You wouldn't happen to know what the stock diff ratio a...

Was meant to say diff ratio, not gear ratio.

I went with an adaptor plate. The plate utilizes the standard 1UZ-FE bellhousing and sits between the R150 and 1UZ bellhousing.

Hey, To the other members who've done a manual 1UZFE swap into their hiluxs, what diff ratio did you guys go for? I've got a 1995 RN105R 4x4 SC utility and I've chosen to go with the R150F gearbox. I'm running 33" tyres and at 100kmph, I'm sitting at 3000RPM.. 90% of my driving is on road and...

Hi, Have recently finish the 1UZ conversion into my RN105R hilux but am having trouble wiring the 4x4 up. The gearbox I am using is the R150F. When we initially purchased the gearbox, it didn't come with the transfercase loom but I've been able to source the loom but one end of the loom...

Was hoping someone could do it privately in the brisbane/gold coast or surrounding areas

Hey, I've been planning on doing a 1UZ-FE swap into my 1996 4x4 hilux RN105R. I am planning to use the vvti motor with a R150F. Who in the Brisbane region or surrounding areas would be interested in doing the conversion for me? I am able to supply all parts or if it's easier for you to...