Search results

  1. 1

    1uzfe in wrangler

    Hi OP, Have a look at this thread: http://lextreme.com//forums/showthread.php?t=6574 Justen is currently running 17psi boost. He uses water injection as well as intercooling. Towards the end of the thread there is a dyno graph of his 388rwkw run. What year is your engine OP? Members have...
  2. 1

    Project Thread SC400T (Lextreme's Version)

    I presume the rubber gloves are so you don't get dirty fingerprints on David's built motor...
  3. 1

    1uzfe in wrangler

    Hi OP, Can you state exactly what you need to know?
  4. 1

    New 2-1 Exhaust System Fitted

    Interesting. Torque convertor not locking up before?
  5. 1

    BIG Single

    It is in a MA70 Supra. There a some photos on my page of the soarer (sc400) crossmember being trial fitted into the Supra, but in the end I decided not to do this.
  6. 1

    BIG Single

    I doubt that it could make 1000rwhp on boost alone, but it should get close enough for me to make up the shortfall with nitrous. The R154 wouldn't hold up for long at that torque though.
  7. 1

    BIG Single

    They do. The photos showing an air filter on the induction pipe where the injectors are date back to before the turbo installation.
  8. 1

    BIG Single

    No point carrying it without it being hooked up!
  9. 1

    Bullet Cams

    That looks fantastic! Are there any videos of it running?
  10. 1

    Twin Turbo 1UZ MKIII Supra?

    http://lextreme.com/forums/showthread.php?t=5592&highlight=turbo+manifolds The manifolds in the above thread were claimed to fit in a Mk3. I went with a big single on mine: http://lextreme.com/forums/showthread.php?t=6693
  11. 1

    BIG Single

    Thanks Justen, The wastegate came with a 14psi spring, so I'll be running that initially. Then I'll just bump it up to whatever gives me 389rwkw...
  12. 1

    BIG Single

    Using an Autronic SM4, running one of the stock cam sensors for cylinder sync. The sticker was for having a nitrous tank in the back. More pics at: http://home.swiftdsl.com.au/~indecent/
  13. 1

    BIG Single

    Not too sure Marcus, the compressor map is here: http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT42/GT4202_731376_2.htm
  14. 1

    Air Con compressor mounting

    Might be a pressure switch to prevent the compressor running without gas in the system.
  15. 1

    BIG Single

    Tonight I finalised the location of the turbo.
  16. 1

    BIG Single

    Last night I finished cutting the flanges from 12mm mild steel plate.
  17. 1

    BIG Single

    Installation has started.
  18. 1

    How to Replace Valve Seals

    Thanks Smitherz!
  19. 1

    Merry Christmas to all Lextreme Members

    Thanks Rod! Santa brought me a big box of 1 1/2" steampipe bends. :-)
  20. 1

    Project Thread Twin Turbo 1UZFE into HQ Coupe

    Great stuff John! It looks like the later blocks and pistons combined with early rods would be the best combo.


Back
Top